operation vrooooom pshhh

[07xtreme]

well today i made the long haul to brooklyn, holy hell what a long day, left at 9am got back tonight a little after 8pm.

as some of you know via my other thread. i drive a 96 legacy wagon, and my goal is a 02 wrx swap.

today, i went down to brooklyn, ny, to get a complete motor, turbo, a crossmember, ecu, and fpc. in turn i came home with complete motor, turbo(no shaft play), a crossmember with sti steering rack(dont know, it was attached to the x-member, so why wouldnt i take it haha) and the fpc. he had pulled the ecu "awhile" ago and seemed to misplaced it(little shady, but whatev)

so i got a great head start. now just to work on my list of other crap, like the harness and now find an ecu(kinda bummed bout that)

http://i47.tinypic.com/2ey9qgg.jpg
http://i47.tinypic.com/15gp3yu.jpg
http://i49.tinypic.com/1znoepw.jpg
http://i47.tinypic.com/2a6mlvn.jpg

heres my shopping list...
brighton harness(not really needed but id like a jump start on wiring)
wideband with digital read out
timing belt
water pump
clutch
plugs/wires

[apkarian100]

Subscribed.

[subarude]

the ecu can be had from most junkyards for like $100

[Bu11dogg2]

*subscribe*

Can't wait for this :)

[squeethebee]

Cool man, good to see all went well with the trip!

ed

[RCKSTR]

congrats on the purchase man :up:

[07xtreme]

no updates on the motor, but got bored yesterday...should i change it to project bagpipe? haha

http://i46.tinypic.com/2le5qit.jpg
http://i46.tinypic.com/2mr6v6u.jpg
http://i50.tinypic.com/34sh3dk.jpg

[Bu11dogg2]

:lol: yes!

[RCKSTR]

where'd you get that wrap? looks pretty cool :up:

[07xtreme]

where'd you get that wrap? looks pretty cool :up:

no wrap my friend, hand painted....what a pain in the A taping that off was haha

[Bu11dogg2]

no wrap my friend, hand painted....what a pain in the A taping that off was haha


:eek: that's pretty cool!

[RCKSTR]

no wrap my friend, hand painted....what a pain in the A taping that off was haha

wow thats even better :up:

[batorr]

Make sure you swap out the fuel rail on the engine. They were just recalled because in cold weather the buldges on the ends shrink and causes fuel to leak through them

[07xtreme]

good to know^^^

[25rSTI]

nice, good luck with everything

[07xtreme]

ok couple questions, do i need to upgrade to a wrx fuel pump? can i re-use the wrx flywheel and just get a new pressure plate and and clutch? and finally, i cant use that sti steering rack the he gave me cuz its too wide right?

also edited my 1st post with the quick shopping list...feel free to slap me around n let me know what i forgot...

[07xtreme]

and im looking for opinions on a clutch setup i should go with, as of right now im gonna run my stock legacy drivetrain...but i eventually may go to the lgt(i think) which i beleive they are both push type? correct me if im wrong...so yea let me know, im thinkin act route but im still lookin around

[batorr]

Im pretty sure you need to use the flywheel and clutch set up for the transmission that you are running. You will need to replace the fuel pump because that pump won't be able to keep up with those injectors. Even after swapping everything you'll still want to get it tunned

[squeethebee]

You match clutch/flywheel **** to the transmission, not the motor, just remember that. And look into using that x-member, you may have to shim control arms or something.

ed

[07xtreme]

yea ill have to shim it...i new the clutch had to match the tranny but i was kinda hopin the flywheel would work, but back to the drawing board with that.

i need to make some measurements, im curious what the difference between the steering racks are

[squeethebee]

It MAY work (the flywheel) but I would just use the Legacy one. You can always check once you pull stuff apart too, my WRX flywheel looked very similar to my RS one, but I had already resurfaced the RS one, so it went in.

ed

[Subygirl8330]

go to car-part.com for the ecu, i got one for my 02 swap from a junk yard in RI for 90 shipped!

awesome hood paint work!

def match the clutch & flywheel to the tranny, i'd recommend an ACT if you haven't already gotten one.

and do upgrade to a wrx fuel pump, i went to an sti one, but only because i found it for $15 used.

[07xtreme]

...

[07xtreme]

...

[squeethebee]

...??

What's up?

ed

[Bu11dogg2]

:lol:

[07xtreme]

me being stupid...i answered my own dumb questions so i self removed them...figured ill just use the spots for updates haha

people selling stuff on nasioc are driving me batty, no one likes to give straight answers...errrr

[squeethebee]

That's Nasioc buddy!

ed

[07xtreme]

so i need to pick some brains...so i was speaking with subimods yesterday about clutches...we got into clutch masters fx100 and fx200, other than that there isnt much out there listed under my tranny, and im not sure what else would work. well the 2 clutch master clutches say the hold up to 70% increase over stock... but my pile stock is only what 100hp and 3 ftlbs haha. but yea 70% over that isnt even stock wrx haha. so what the f should i do. do i just get a clutch and hope for the best. or should i start looking for a new tranny and rear end?

let me know what you think...we shall compare notes

[squeethebee]

Uh, you have way more than that for power. Mine, with 238k on it put down 101hp and 118 tq TO THE WHEELS, no mods. They are rated at 140hp stock, WRX's are 227, so that's not even 50% more power. 70% over stock would last you for quite a while.

Besides, you should be looking at the clutch torque holding capacity, not percentage over stock. Real numbers man!

ed

[Diztracted]

operation vrooooom pshhh

http://img64.imageshack.us/img64/7031/ihavthecape.png

[Bu11dogg2]

^^^^:lol:

OP,

You need to buy a clutch that suits your driving needs

[07xtreme]

so I'm down to needing a clutch, exhaust tubing, and general maintenance stuff...oh and spring needs to hurry up haha.

but anywho, so i came across a wiring harness pretty cheap, my question is...according to my manual pretty much all legacy's 95-99 are generally the same. there for a 1996 legacy outback harness should be the same or very similar to my 1996 legacy brighton harness. the outback should just have more wires than mine due to the extra options, correct? or are they identical i just have plugs chilling?

i have yet to pull my dash down to look due to me still needing to drive it every day haha

[07xtreme]

newest question. so looking over the motor i have i missing some stuff here and there. different lines and what not. does anyone have any places to find great diagrams of the different lets say vacuum lines and where they go? like basically and overall schematic.

also it appears i dont have the stock boost solenoid anymore. what do you recommend? find another stock, go manual boost controller, or should i go GM boost solenoid?

[squeethebee]

Forge UNOS MBC.

If you find vacuum diagrams, let me know, lol, I'm still trying to figure that fully out.

Oh, and pm me if you are still looking for exhaust parts.

ed

[tylerq219]

nick i can give you the link to full schematics to wiring and plumbing for the motor if need be.

[squeethebee]

If you could give that link to me too, it would be much appreciated...

ed

[im_so_blue]

http://img64.imageshack.us/img64/7031/ihavthecape.png

that artist is the best thing to ever come out of Wyoming :lol:... maybe the only thing at that :spin:

[07xtreme]

update:

2.2l is out, all a/c crap is out, dash is out, dash bar is out, hvac unit is out....started labeling the legacy harness as i unplugged, now i just need to remove that harness then its on to the wiring. should be interesting since i will be doing it myself.

cross-member swap will happen tomorrow. waiting on clutch and new flywheel to arrive.

whats the deal with the fuel pump controller, i have yet to look into it. i have it, do i have to merge it in or is there a plug for it. ill be doing research on that soon i guess, gotta get that and the fuel pump done so that will be off my list.

[squeethebee]

You have to wire it in somehow, I am still stuck on that as well :(

ed

[07xtreme]

hmmm, any other snags you've come across that i should watch out for? i was also reading something about some other gas tank sensor or something that is only in the wrx tank, so ill be throw a code for it?...no idea, i need to look into the whole fuel end of this swap

[squeethebee]

Never heard of that, put my Walbro in my 1.8 assembly and tank. If there is a code, they can get rid of it once tuned.

Can't think of anything else to watch out for really, good luck on the wiring though.

ed

[07xtreme]

so we put my brighton harness on the floor next to the wrx harness last night, oh man, it was halarious...one of the under dash connecters we found was the same on both, the brighton had 2 wires going to it, the wrx had 26 hahahaha

http://i44.tinypic.com/amgww.jpg
http://i39.tinypic.com/30257is.jpg

[Bu11dogg2]

damn!

[squeethebee]

Like I said, GOOD LUCK :lol:

ed

[07xtreme]

got some work done...
http://i40.tinypic.com/fe32bn.jpg

motors in, bolted to the tranny, got the starter in. now just gotta run the wiring and trouble shoot some issues we've run into. im thinking a week n a half max, and she'll be good to go

[squeethebee]

Just in time to take your truck back out:lol:

ed

[afbeefcake]

Simaler to the swap i did for a friend (98 legacy with 02 motor).

Yes, you need the fuel pump controller. It connects to the wrx rear wiring harness. On my friends car I put it under the dash and only had to run a new ground back to the tank.

The senser is like a fuel temp senser or some thing. And its missing from the legacy tank, but I think its in the fuel pump cage, so if you got a wrx fuel pump with the cage and fit it in the tank then you would have that senser.

Its been a wail since i did this so mite not be %100.

[07xtreme]

yea i have got the fpc, and i have a wrx fuel pump but i dont have the fuel pump cage...we shall see, i feel like my dash is going to be full of lights haha

[07xtreme]

Just in time to take your truck back out:lol:

ed

haha yea, i actually brought the truck out almost 2 weeks ago, and the 20s went back on last Thursday. boy did i miss her

[07xtreme]

muwahahahaha

http://i42.tinypic.com/any9m0.jpg
http://i43.tinypic.com/or83sg.jpg

[squeethebee]

All donzo?

ed

[squeethebee]

And DAMN IT those wheels look sick in gold.

ed

[07xtreme]

UPDATE:
http://www.youtube.com/watch?v=RcbwpgoHyVU

[RCKSTR]

:eek: congrats man, looking forward to seeing this thing in person :up:

[07xtreme]

so the car is all back together. except im waiting on a obd2 connector to be shipped to me.

took it for a drive last night with my a/f hooked up....it idles around 12.7-13.2/1, my issue is when i get into boost(not really pushing it due to not knowing any of the codes haha) my a/f rides up to 15.2/1ish. now you think that's 100% tune or its some underlying problem?

i dont plan on pushing the car any time soon. i need to get tuned and i need to finish the break in period on my clutch.

also, im running a hallman mbc and i had it set at 7psi. so last night i gave it one full turn, got it into boost to see where i was, still 7lbs, but it felt waaay stronger. so i pulled into a parking lot and gave it a 3/4 turn. got it into boost, 7lbs again but yet again felt stronger. im compuzzled on that one haha.

[07xtreme]

bump?

[squeethebee]

I am very jealous of how quick this swap went :lol:

Did you by chance take any pictures of how you went about getting the FPC hooked up and mounted? I think that's about the only thing keeping mine from finishing up.

ed

[07xtreme]

Wow i guess I never really updated this. Well, I had the car tuned back before the nems kanc cruise. It's running well at 17lbs. But it seemed slower than it should. I still have yet to dyno it or take it to the track so im not sure where I'm at. But I was noticing after any short or long drive my top mount was getting severely heat soaked. I only have an outback hood so its just the baby scoop. So I decided to snipe a front mount...

http://i.imgur.com/1uZPE.jpg
http://i.imgur.com/8dw9L.jpg

And as it was sitting there while I was working on it. I noticed the rear quarters were starting to bubble pretty bad so I decided to fix that. And while I was at it I wanted to install my outback rear bumper to match the front and hood....oh and I decided to paint it too...

http://i.imgur.com/dB9Mn.jpg
http://i.imgur.com/vxxAC.jpg
http://i.imgur.com/4ZBCm.jpg
http://i.imgur.com/C4oI1.jpg
http://i.imgur.com/flHGe.jpg

[jmb1983]

I love it!!!!! Are you still running a td04?

[RCKSTR]

Oh man this thing has come a long way from when you first got it! Great job thus far man :up:

what fmic is that? I like how you barely even see the hot side pipes :)

[Joe]

wow! :eek:


looks real good :up: gonna be such a sleeper.

[yaya]

Awesome! I've been wanting do a project like this myself. Kudos to you.

[07xtreme]

Yes, im still on the stock turbo. Not sure how far ill push this motor. I never opened it up to check anything and I have no idea on its past. So if i rebuild/build it then ill probably just go 16g or something simple.

The kit is cxracing's sti ver.2 kit. I just made it fit. Little trimming here and there, but no biggy.

And thanks for the compliments

[Berge56]

Awesome job mang! What paint did you use for the rims? I plan on painting my legacy snowflakes gold this winter!

[Bu11dogg2]

Looking good!

[squeethebee]

Looking great, white wagons FTW!! Did you ever swap trannys?

ed

[DHGurs]

This thing is coming along FAST! Looking good. Want this in the Member's Journal section?

[98Wagoon]

such a nice wagon, sir!

[07xtreme]

Awesome job mang! What paint did you use for the rims? I plan on painting my legacy snowflakes gold this winter!

ill look to see if i still have a can, it was just some gold i found at walmart.

Looking great, white wagons FTW!! Did you ever swap trannys?

ed

nope still running stock tranny. just grinds in third still. im sure itll pop sooner than later, but whaaatever haha

This thing is coming along FAST! Looking good. Want this in the Member's Journal section?

sure you can move it if youd like


...and to anyone else, thanks for any and all compliments.

[squeethebee]

Any plans for more power, or just run it till the trans blows for now?

ed

[07xtreme]

as of right now, and probably thru the winter itll stay where it is. possibly next spring ill upgrade the turbo. but im not sure. i really dont want to blow the motor or get to the point it has to be built. i really need to dyno it and see where im actually at now

[07xtreme]

Awesome job mang! What paint did you use for the rims? I plan on painting my legacy snowflakes gold this winter!

Well weeks later haha,

http://i.imgur.com/sNskw.jpg

[07xtreme]

so i got bored with two things. my mini truck side said im not low enough, but my wallet said yes you are. so i met in the middle and grabbed a set of raceland coilovers for the wrx/sti. they fit minty fresh and now i could lay floor pan if i wanted to.

and the second thing i got bored with was the hood, just white isn't my style so i worked on that a little.

i put the raceland coilovers in on Tuesday, let it settle, think i may go a little lower but not much. painted 2/3s of the hood last night, needs some dark gray spots and that will be done.

http://i56.tinypic.com/33etnw9.jpg
http://i53.tinypic.com/25kn809.jpg
http://i51.tinypic.com/icpt1v.jpg
http://i53.tinypic.com/1zb6kb7.jpg

[07xtreme]

oh and i think that side view looks like the front is higher because of the dirt parking lot. i measured it all out on a flat cement floor and every corner was identical.

[Subyspeed]

I love the camo!

Thats so funny because yesterday i said i wanted to paint my outback fall camo .

How did you get the camo patern to look so good?

[07xtreme]

its 100% free hand, id make a big block of tape, take an exacto knife and carve out the pattern, peel it away and bam, stencil ready for paint.

[Subyspeed]

Thats what i was thinking but i was not sure if that was the way to go about it or not.

Thank you:D

[squeethebee]

So low, I love it!

ed

[hiprsha666]

Cool project dude. I still have my old 1995 legacy. If all goes well and I get a house with a garage soon I am going to start having some fun with it. It is an automatic though so I will need a tranny swap too. But this is definitely an inspiration.

[Berge56]

Car looks great slammed!!! Nice job on the hood.

[boxerturbo]

Car looks sick man! Same car ive got too and same hood and front bumper. Hopefully some day ill have my turbo swaped too.

[07xtreme]

yea i love the outback look, my cars such a mutt. outback outside, brighton inside, and wrx power plant. confuses the crap out of people. i always get asked why my outback has no options haha

and thanks for all the compliments

[07xtreme]

well lets see here, lowered it a tiny bit more, put my roof rack back on and added a "dark gray" to the hood...

http://i52.tinypic.com/23hm3ar.jpg
http://i55.tinypic.com/ajnqq1.jpg
http://i51.tinypic.com/nl750g.jpg

a)wish i had my hood latched for all three
b)need a proper photo shoot again
c)...think it may need to go a little lower, don't think there will be enough snow pushing action

also, 07 wrx injectors are in, and ebay header is going in tonight....saving for a vf39 currently, oh and a drive-train haha

[apkarian100]

Looks very nice. I like it a bunch.

[07xtreme]

this should be fun....

before...
http://i35.tinypic.com/25i3rja.jpg

after...
http://i55.tinypic.com/ajnqq1.jpg

[Berge56]

What a transformation! :up:

[Joe]

Your car makes me moist. :up: good job.

[Evoeater]

You should camo the entire car that would be different

[AllWheelsDriven]

You should camo the entire car that would be different

+1

[SubySnacks]

Subscribed, excited to see this thing.

[07xtreme]

well its been like a month and a half since this threads been touched....

ive added a trailer hitch with a shackle so when i get stuck in the snow i can get pulled backwards quite easily.

also changed my maf and installed a spt intake. car idles soooo much better and my a/f is now reacting like it should.

took the car down to bren on monday so he could polish the tune. last tune i had on the old intake put down 257hp/278tq...this tune with the new intake feels much stronger and its possible we gained like 10-15hp, but no way to tell till i get it back on the dyno...which i plan to do sooner than later

also, saturday im picking up a P&P deadbolt evoIII 16g with very low miles. it wont go on till spring, mostly because i want to wait so i have a second vehicle if something breaks.

that about sums it up. im just going to enjoy the crap out of it all winter. i know its going to be fun because i can already drift dry pavement with no issue, so snow should be awesome

[Berge56]

Nice dude! Good luck with the new turbo setup. :D

[07xtreme]

16g is sitting in my backseat just begging to be put on

going down to see bren on the dyno saturday, ill re-post with final tdo4 numbers. hopping we improved over the 257hp/278tq, but we shall see.

[Berge56]

16g is sitting in my backseat just begging to be put on

going down to see bren on the dyno saturday, ill re-post with final tdo4 numbers. hopping we improved over the 257hp/278tq, but we shall see.

Wait you put down 257/278 with a td04?

[BG @ BrenTuning]

Wait you put down 257/278 with a td04?

Yeah, fmic, header....the works :)

[BG @ BrenTuning]

PS those polished ebay intakes SUCK. garbage.

[Berge56]

:lol:

[07xtreme]

Wait you put down 257/278 with a td04?

Haha yep, only thing I'm missing is an aftermarket turbo inlet. I'm hoping for 270hp/290tq. But there's only one way to find out.

PS those polished ebay intakes SUCK. garbage.

Yea that intake was a joke.

[tylerq219]

where the **** you been?

[Yint]

I see you around Nashua a lot. I'm in the Lowered green bugeye wagon with the blacked out FMIC, not sure if you have seen me. But your car looks really nice.

[Boosted SUV]

16g is sitting in my backseat just begging to be put on

going down to see bren on the dyno saturday, ill re-post with final tdo4 numbers. hopping we improved over the 257hp/278tq, but we shall see.

nick, what did you end up with?

[SubySnacks]

^Shawn?

[Berge56]

:couch:

[BG @ BrenTuning]

nick, what did you end up with?

255whp, 298wtq. The previous intake made artificial power from the lean race gas like AFR ratio no matter the tuning. It was crap. By getting the AFR nice and safe where we wanted it the car lost a few ponies throughout the powerband. But torque went up.

[serioussubaru]

255whp, 298wtq. The previous intake made artificial power from the lean race gas like AFR ratio no matter the tuning. It was crap. By getting the AFR nice and safe where we wanted it the car lost a few ponies throughout the powerband. But torque went up.
nice torque!

[BG @ BrenTuning]

Yes I was surprised.....check out my section for more details on the tune.

[07xtreme]

Picked up a legacy gt 4.11 final drive 5spd/rear diff yesterday. Along with a disc conversion and rear hatch spoiler. Got the tranny for 100% back up. Let's me beat the crap out of the current one without worrying too much.

With that being said, pushed the car on dry pavement for the first time. Never thought my open diffs would let me blow it sideways and smoke some tire, but to my surprise the back end swung out and actually laid rubber down. Helps I'm on snows and the pavement probably was a little sandy, but it didn't break so I'm happy haha

[Berge56]

Nice pickup! Always good to have those kind iof spare parts kicking around.

[02wrxman]

255whp, 298wtq. The previous intake made artificial power from the lean race gas like AFR ratio no matter the tuning. It was crap. By getting the AFR nice and safe where we wanted it the car lost a few ponies throughout the powerband. But torque went up.



now thos are some great numbers for the wagon

[GraffitiRR]

nick we should do a few pulls sometime. i wanna see what im up against for the time being.

[-III]

255whp, 298wtq. The previous intake made artificial power from the lean race gas like AFR ratio no matter the tuning. It was crap. By getting the AFR nice and safe where we wanted it the car lost a few ponies throughout the powerband. But torque went up.

I want more torque!:devil:
But the mind says the tranny won't like it too much :shrug:

[07xtreme]

nick we should do a few pulls sometime. i wanna see what im up against for the time being.

Sounds good to me, I'm around every night

I want more torque!:devil:
But the mind says the tranny won't like it too much :shrug:

I can't believe my tranny is still together. I would say its because I'm gentle with it, but that's not the case one bit haha.

[-III]

I try to be nice to it but, well you know:D

[Boosted SUV]

nick we should do a few pulls sometime. i wanna see what im up against for the time being.

Me too! lol

Nice #'s nick!

[MikeyMeyagi]

sweet ride man, it was cool meeting ya

[BogeyBones]

wow man, that is a schweet wagon you might say

[BG @ BrenTuning]

the current power and legacy 4.11 should be REAL fun light to light

[Berge56]

4.11's are helping save your transmission. :)

[07xtreme]

4.11's are helping save your transmission. :)

I only have 3.90s right now, my back up tranny/diff is 4.11s

[Berge56]

ah.... reading fail. :palm:

[Berge56]

any future plans/updates?

[07xtreme]

Well haven't updated this in forever. Mostly because there's been nothing new other than rust coming back haha.

But I started having a lean a/f issue that bren helped me track down. I have a slit in my inlet where the clamp holds it on the turbo. So tonight I'm installing my samco inlet and 16g...then its time for a re tune

Also in the next month or so my buddy and I are going to do the body work for real and spray the car with single stage. Not sure if ill stay white but if I do I think the hood will be painted another plaid. People confuse my snow camo with a cow too much.

So hopefully soon the car will be about 300whp/300ft lbs....should make for some good fun

[squeethebee]

Good to hear it's still going strong.

ed

[Berge56]

Be careful with that 5 speed.

[07xtreme]

16g is on, same with the new samco...I had a huge tare where the clamp held the stock inlet on the turbo.

Right now I'm running 07 injectors but bren recommended I upgrade those again. So I ordered some dw 750s, they should be here by Friday. He also wants me to ditch the ebay header and go back to the stock one, so ill do that this week also....

Will be up dating my for sale thread soon with the 07 injectors and ebay header. I got like 10-15hp from the header but I lost a little spool time

[07xtreme]

And as for my tranny, I dunno, I think its got some sort of black magic.

[Berge56]

:lol: It has alot to do with the driver too. Good job.

[My25RSL]

Me and this thread, we could be best friends...my goal is also an 02-03 wax swap.

[07xtreme]

Me and this thread, we could be best friends...my goal is also an 02-03 wax swap.

Honestly, the swap is really easy. 2.5 weeks including doing the wiring myself. The long part is fixing any snags. Such as my two teeth off timing. Just take your time and research. I've gone from not even doing my own oil change to doing a complete swap in less than five years, anybody can do it

[-III]

Headers coming off for better flow to new turbo?

[My25RSL]

Honestly, the swap is really easy. 2.5 weeks including doing the wiring myself. The long part is fixing any snags. Such as my two teeth off timing. Just take your time and research. I've gone from not even doing my own oil change to doing a complete swap in less than five years, anybody can do it

Yint and I have already done the swap to his car. But when I do it to mine, im doing a full interior swap too....so I should be like 2 or 3 days work.

[07xtreme]

Got tuned and dyno'd by bren yesterday. Put down about 320/300...car really gets up and goes now

[Berge56]

Wow that's a nice improvement!

[hiprsha666]

Nice numbers man. That's great!

[Berge56]

and what's new?

[RCKSTR]

pretty sure this thing is totalled :sadpanda:

[hiprsha666]

I thought he decided to keep it after the accident.

[RCKSTR]

well then... I don't know :lol:

[Soul Shinobi]

wat.

[GraffitiRR]

car isnt totalled. I hung out with nick over the weekend. Minor damage happened in the accident and he jumped the gun and wanted to sell the car. its back to normal and i believe hes sourcing a motor to build but dont hold me to it.

[-III]

I've seen him drive near BG a few times

[Berge56]

Does he not have internets? :lol:

[Simple Skillz]

Seen u today along with Simply_Clean at hudson mcdonalds earlier. U have a mean sounding, sweet looking ride.