PDA

View Full Version : WRX Transmission - 275whp???


Hero
10-21-2009, 09:33 AM
Hey guys,

Chime in - trying to plan out future mods.

I heard that the stock WRX manual 5spd transmission is only good up to about 275whp? Is that true?

And if so - what do you suggest as an upgrade?

jwebsta32
10-21-2009, 09:41 AM
Currently running 330whp through mine. No problems with gears as of yet. 3 runs at drag strip. I do need a new clutch tho it is slipping at WOT in 4th and 5th. What year car do you have. Obv 02-05

method
10-21-2009, 10:19 AM
hp is not going to kill your transmission.

RCKSTR
10-21-2009, 10:43 AM
Ya hp won't affect your tranny, launching it or shifting hard will. Mine was at 300whp for some time with no tranny issues. It's just how you drive really

Hero
10-21-2009, 10:56 AM
Currently running 330whp through mine. No problems with gears as of yet. 3 runs at drag strip. I do need a new clutch tho it is slipping at WOT in 4th and 5th. What year car do you have. Obv 02-05

2005 WRX

Hero
10-21-2009, 11:00 AM
thanks guys - I appreciate the input - don't really want to swap the tranny and am aiming for 300whp daily driver/not planning on shifting to death so i'm glad to hear it's all good with the stock one

Rokkit
10-21-2009, 11:37 AM
Mine broke with 250 ft/lbs of Tq during a second gear pull with the stock turbo.

I hate 5 spds

Hero
10-21-2009, 11:51 AM
Mine broke with 250 ft/lbs of Tq during a second gear pull with the stock turbo.

I hate 5 spds

Were you dropping down to second or climbing up to it? :(

CTATV
10-21-2009, 12:16 PM
I have been told under 300 you should be fine if you dont thrash your tranny. truth is you can thrash it at any HP though. now when you go above 400 on it and floor it in 1st gear grenade is a possibility if you do it a lot

drdabbles
10-21-2009, 01:18 PM
Rough shifting and shocking the tranny is what breaks gears. Imagine the teeth of two gears meshing. If you shift rough, the teeth are going to be pushing one way and then the other...that's where teeth get sheared off. You can do it in the 5spd and you can do it in the 6spd. People have even destroyed PPGs. Drive it like you stole it, and you're gonna be buying parts often. :unamused:

mdungelman
10-21-2009, 01:42 PM
^That.

BG @ BrenTuning
10-21-2009, 02:04 PM
^That.

Word.

You can run alot of power through them if you don't shift. They break when the above happens :lol:

Ask me how I know, no seriously ask me 4 times :lol:

Nate8409
10-21-2009, 02:29 PM
One wrong shift is all it takes even at the stock power level. Bang second or third wrong and you can create a weak point in a gear or hub.

Robk0000
10-21-2009, 09:25 PM
torque kills tranny. simple.

Seraphinwolf
10-21-2009, 09:47 PM
torque kills tranny. simple.

One of the very reasons for going with a sixspeed for me.

Evoeater
10-21-2009, 11:50 PM
I ran 350 tq on on 07 wrx for 15k just fine weekend track car too...

RCKSTR
10-21-2009, 11:54 PM
ya my 5 speed has seen more than its fair share of drag racing :lol: never missed a shift at the track and it still feels perfect daily :)
its all about the shifting, and I do it quickly :devil:

batorr
10-22-2009, 03:33 AM
import tunner put out an artical about the wrx transmission about 3 or 4 months ago. They basicly said that as long as you don't dump your clutch or try lunching your car from a start it should be fine with moded motors. They also said that if you have an sti tranny you shouldn't have to worry about this

BavarianSubie
11-02-2009, 02:58 PM
My buddy's 05 WRX with 45K on it just tossed 3rd gear. I usually deal with BMW's so this will be my first foray into the AWD wonders :)

Will any gearset from an 02+ WRX replace what's in his gearbox, or does it go by years specifically? I'd like to drop the tranny and replace the damaged gears, but need to know what to buy....

Thanks!!

BG @ BrenTuning
11-02-2009, 04:08 PM
you will need specific gearbox tools for that subaru.

while you are in it might as well put in LGT gears, same ratios but stronger.