C-Rolla
08-28-2009, 04:47 PM
Slowboy Racing is a fully functional, self contained machine shop. our full time machine staff works every day to build some of the nicest cylinder heads around!
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/DSCN3397.jpg
We know that there any several options out there for cylinder heads but let me show you why Slowboy Racing is different.
Each cylinder head is carefully inspected before we even begin. We check to make sure it's up to our standards to be properly built.
This is what they look like before we even begin the machining process.
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/IMG_7727.jpg
It then goes through our starting processes and hits the chemical cleaning and hot tanks and then blasting!
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/DSCN3337.jpg
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/DSCN3336.jpg
It then goes to one of our guys to make sure all of the threads are clean, all of the surfaces are good and it begins the porting process!
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/IMG_7720.jpg
The head then goes to have the valve seats prepped for the appropriate valves.
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/IMG_7736.jpg
The head goes through several checks to make sure everything is 100%. We make sure to do everything possible to make sure it will perform!
The head is assembled and then vacuum checked for leaks or anything!
We put a lot of work into our cylinder heads and it has really shown. We have shipped hundreds of heads all over the world for street, rally, circuit and drag cars!
Let us know what kind of head we can put together for you!! :thumb:
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/DSCN3397.jpg
We know that there any several options out there for cylinder heads but let me show you why Slowboy Racing is different.
Each cylinder head is carefully inspected before we even begin. We check to make sure it's up to our standards to be properly built.
This is what they look like before we even begin the machining process.
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/IMG_7727.jpg
It then goes through our starting processes and hits the chemical cleaning and hot tanks and then blasting!
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/DSCN3337.jpg
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/DSCN3336.jpg
It then goes to one of our guys to make sure all of the threads are clean, all of the surfaces are good and it begins the porting process!
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/IMG_7720.jpg
The head then goes to have the valve seats prepped for the appropriate valves.
http://i678.photobucket.com/albums/vv145/teamsbr/Florida/IMG_7736.jpg
The head goes through several checks to make sure everything is 100%. We make sure to do everything possible to make sure it will perform!
The head is assembled and then vacuum checked for leaks or anything!
We put a lot of work into our cylinder heads and it has really shown. We have shipped hundreds of heads all over the world for street, rally, circuit and drag cars!
Let us know what kind of head we can put together for you!! :thumb: