GT35R '07 STi!

[EFI Logics]

We had an '07 STi come up a few months ago for a stage 2 tune with meth. We listened to it before the tune like all '07s and it sounded like a broken ring land. The compression test wasn't good and we had just gained a new engine job. The car came in a few weeks ago and now that the parts are all in, is really starting to take shape!

Besides building a new block with forged pistons, rings, valves, and springs, we also put in Cosworth 272 cams, TGV deletes, and, like every engine job we do here at EFI, ARP head studs.

With the extra strength in the block, we then got a Perrin GT35R rotated kit with a Tial wastegate and a 50mm Tial blow off valve. We went with the 1.06 hotside for the turbo, which will get a nice powder coating this week. We're installing an APS 725 FMIC (black core), KS Tech 83mm intake, Grimmspeed boost control solenoid, Grimmspeed hi-flow crosspipe, ACT 6-puck sprung clutch, Group N engine and tranny mounts, wingless carbon fiber trunk, electronic meth controller, Tein S-Tech springs, 850cc injectors, a custom fuel system by Jack (if anyone has seen Limited777's car, it'll be the same thing), and perhaps some gauges as well!!

This is quite a large project and we'll be posting up more when it gets closer to completion! Here's some pictures so far with the engine out of the car, although it just got dropped in a few minutes ago!

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_1.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_2.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_3.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_4.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_5.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_6.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_7.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_8.JPG


- Pete@EFI

[EFI Logics]

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_9.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_10.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_11.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_14.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_15.JPG


- Pete@EFI

[GC4-RS]

*subscribed

[Bu11dogg2]

*subscribed


+1

I'm so freakin excited to come down in August.

It's like a grown man's Wanka factory in there.

[Street Burner]

If I ever do a new engine I am going to paint it and the intake will be polished blue.

Nice looking motor though

[-=The Boss=-]

way to big :hide:

[boost25]

Schweeeeeeet...

Any info/pics on that wrb widebody with the cf wrc wing?

[Street Burner]

Schweeeeeeet...

Any info/pics on that wrb widebody with the cf wrc wing?

hell yea if i had the money thats the body kit. $3,200 for the kit, best looking kit for the 04-05 wrx

[EFI Logics]

Schweeeeeeet...

Any info/pics on that wrb widebody with the cf wrc wing?

:lol: What do you want to know? It was at WBM. :) We'll be putting an AEM EMS in that next week.

- Pete@EFI

[25rSTI]

looking real good. makes me miss my motor/car....still waiting to get her back

[boost25]

:lol: What do you want to know? It was at WBM. :) We'll be putting an AEM EMS in that next week.

- Pete@EFI

Just seeing if you had more pics really. :D

[EFI Logics]

Just seeing if you had more pics really. :D

I'll post up a new thread about it next week hopefully... once it's tuned with the AEM EMS and we have some final numbers...

- Pete@EFI

[brian]

cant wait to see what the GT35R puts down. Chris tuned mine and it was pretty much the same build. except no cams...

[EFI Logics]

A bit of an update... we have gotten most of the fuel system parts in at this point, so Jack got to work on getting the turbo in...

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_17.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_18.JPG

Next step is the shifter parts, gauges, and cutting the bumper for the 725 FMIC. :)

- Pete@EFI

[EFI Logics]

Almost there....

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_19.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_20.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_21.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_22.JPG

- Pete@EFI

[etaks99rs]

sick! I can't wait to pour some money into my car to make it as sweet as that!

[EFI Logics]

More! It's getting there... bumper is cut and installed, engine bay is all set. Just finishing up gauges, a meth controller, then comes the break in period!

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_23.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_24.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_25.JPG

- Pete@EFI

[Bu11dogg2]

looking good!

[EFI Logics]

A big update for this car... it has been delivered to Matt and he's having good fun breaking it in! It's been two days and he's already broken it in 500 miles out of the 1000 he needs by next Friday for us to do the full tune. The car came out great and he'll be changing out his Greddy catback to an Invidia before the tune later this week in order to get the most out of the car.

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_29.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_30.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_31.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_32.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_33.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_34.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_35.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_36.JPG

- Pete@EFI

[EFI Logics]

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_37.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_38.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_39.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_40.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_41.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_42.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_43.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_44.JPG

- Pete@EFI

[EFI Logics]

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_45.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_46.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_47.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_48.JPG

- Pete@EFI

[97legacygt]

Nice lookin car :up:

[itsmy04wrx]

Wow it came out great! Dyno footage when he brings it back?

[SubyFr3ak]

*drools* Really pretty car... nice job!:up::wub:

[EFI Logics]

Wow it came out great! Dyno footage when he brings it back?

Absolutely, he's set for a tune at 12pm on Friday. I'll be taking more pictures and video. :)

- Pete@EFI

[EFI Logics]

We finally got Matt's 07 STi on the dyno and final tuned. Unfortunately, his Cooling Mist Methanol system was not working properly at all, so we decided to tune the car for pump gas this time around.. We have ordered him an Aquamist HSF6 system, which will be in a few weeks. The car responded extremely well and made excellent power on pump gas...

Final Numbers: 444whp and 372wtq @ 22psi on 93 Octane

Mods: EFI Logics Stage 1 Block, Cosworth 272 Cams, EFI Logics Stage 1 Heads, EFI Logics Complete Fuel System, Perrin GT35R 1.06, Tial EWG 44mm, Grimmspeed BCS, GrimmSpeed Crossover pipe, APS 725 FMIC, KSTech 83mm Intake, DW850cc Injectors, Cobb AP V2 Tuned

http://efilogics.com/dyno/graph.php?runid1=459&runid2=0&hp=1&torque=1&gb=0

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_28.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_21.JPG

Video to come!

- Pete@EFI

[EFI Logics]

Video:

http://www.youtube.com/watch?v=tsGMxwdTcGc

- Pete@EFI

[EFI Logics]

Update! Meth kit is almost done, the Spec C tank is in, the Hellas are in, and the new bumper is here and painted with everything swapped over! Tune tomorrow! :D

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_49.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/MattF_07STi/MattF_07STi_50.JPG

- Pete@EFI

[EFI Logics]

Here's the graphs from Saturday:

http://efilogics.com/dyno/graph.php?runid1=529&runid2=0&hp=1&torque=1&gb=0

http://efilogics.com/dyno/graph.php?runid1=529&runid2=0&afr=1&boost=1&gb=0

And the pump map with the meth map:

http://efilogics.com/dyno/graph.php?runid1=529&runid2=459&hp=1&torque=1&gb=0

The car made 524whp and 471wtq @29psi with the meth. :)

He might be back in the spring for equal length headers, a dual Walbro setup, and possibly larger injectors to really see what we can get out of it... plus C16.

- Pete@EFI

[GC4-RS]

man that car is sic, love the wiingless CF trunk

[Psychoreo]

Here's the graphs from Saturday:

http://efilogics.com/dyno/graph.php?runid1=529&runid2=0&hp=1&torque=1&gb=0

http://efilogics.com/dyno/graph.php?runid1=529&runid2=0&afr=1&boost=1&gb=0



The car made 524whp and 471wtq @29psi with the meth. :)

He might be back in the spring for equal length headers, a dual Walbro setup, and possibly larger injectors to really see what we can get out of it... plus C16.

- Pete@EFI

You officially owe me a new computer chair.....this ones stained...

[javasti2004]

i wish i could do something like this looks good love the whp( thats wheel horse power not whip however it is good looking car)