cheap boost controller

[Kevin]

if anybody is looking for a 3 port boost controller thats the same as the perrin one here is one for 24 bucks. I'll be ordering one to go on my green setup.
http://airinc.thomasnet.com/item/air-valves/humphrey-direct-acting-310-410-series/310-12vdc?&seo=110

[Murphy2012]

Hmm...any better than a GM BCS?

[Kevin]

its the one I was told to get by ted so I want to say yes.

[Murphy2012]

Good enough for me.

[Murphy2012]

Hey Kevin, can you get some info on Ted about how/where he mounted it? I want to look at his solution before I buy this instead of the GM one.

[Kevin]

send him a pm on nasioc

but I think he mounted it right were the stock on was. I guess all it is two wires then its in.

[RCKSTR]

this sucks, I've allready picked up the gm solenoid. the gm one was $20 and the harness for it was $18 wtf:unamused:
oh well, atleast its cheaper than the perrin solenoid:)

[Kevin]

its wayyyy cheaper then the rebadged perrin one lol

[Pulski]

I still need to put my GM BCS on. I've had it sitting around here forever.

[-=The Boss=-]

Prodrive one works. But its $99...but it works. The GM is loud :eek:

[Murphy2012]

Gonna get the one Kevin let us know about sometime this week!

[Kevin]

I'm gonna order it after I move. ted has the same one in his car and it seems to work very well.

[boost25]

Threadjack.

When you moving?

[Kevin]

this weekend I think

[boost25]

:eek:

[Kevin]

I'll still be around this area lol

its only a few exits up 16

[nhsilversti]

mine is mounted in the OEM location with a custom bracket to use oem attachment.

[Murphy2012]

Well I want to get this, but I need a few things answered. Ted if you can help out. Can you do a little more in depth into the custom bracket you made? I just want to have everything ready so I can install when I get down to my tuner. I am not going to drive the car with it installed and not tuned. I figure get the walbro in, drive it down to Mike, he said he would install the BCS for me, but I want to make it as quick as I can.

[RCKSTR]

Well I want to get this, but I need a few things answered. Ted if you can help out. Can you do a little more in depth into the custom bracket you made? I just want to have everything ready so I can install when I get down to my tuner. I am not going to drive the car with it installed and not tuned. I figure get the walbro in, drive it down to Mike, he said he would install the BCS for me, but I want to make it as quick as I can.
hey not trying to hijack the thread buy whos your tuner? mike from TA? if so, he did a really good job w/ my car!

[Murphy2012]

Hes tuned my car a few times, with the stock turbo. I want to go open source, but I dont have a schedule that really works with anyones to teach me. I want to get the car running to its max potential before I figure out if I want a new turbo or not.

[nhsilversti]

Well I want to get this, but I need a few things answered. Ted if you can help out. Can you do a little more in depth into the custom bracket you made? I just want to have everything ready so I can install when I get down to my tuner. I am not going to drive the car with it installed and not tuned. I figure get the walbro in, drive it down to Mike, he said he would install the BCS for me, but I want to make it as quick as I can.


it is simply a bracket that screws to the new boost solenoid with a "c" at each end to fit in the rubber gromets. look at the OEM one and the 2 rubber mounts, you will get the idea

[Murphy2012]

Cool, thanks sir! Look forward to meeting you at some point.

[Nate8409]

Is the OEM BCS slow or leaky?

[Kevin]

ya I guess it's slow and doesn't control the boost that well.

[-=The Boss=-]

Is the OEM BCS slow or leaky?
my guess is it cant control the volume. with my LGT and a 20g the most the stock could handle was 19 :spin: