View Full Version : A not so easy EZGC
3pt0RS
06-03-2010, 11:51 AM
Starting from a 94 without the normal rust (very hard to find in NH) and a 2001 EZ30 hopefully on the way. Got some pics this time to keep everyone happy. New seats from a 99 Legacy GT are in the Garage as well as some 07 Legacy Outback 3.0 Front brakes. My Ex pulled and the driveway and just shook her head this morning :)
Pic Link
http://rides.webshots.com/album/577856729vvlLPZ?vhost=rides
looking for an 04+ STI Cat back
Bu11dogg2
06-03-2010, 12:19 PM
Content blocked by your organization :(
Seraphinwolf
06-03-2010, 12:47 PM
Those are the moments you enjoy the rest of your life! :D So pics of the new chassis for try number 4 are good. You should check your tags though. One is labeled at the brakes but is a pic of the car. Source a new hood yet? That's some nasty rot on the hood.
squeethebee
06-03-2010, 03:18 PM
Cough, I have an 05+ WRX catback...
Also, nice looking car, reminds me of my very first Subaru, I miss her.
ed
3pt0RS
06-04-2010, 08:55 AM
Labeled the Photos
Seraphinwolf
06-04-2010, 10:35 AM
Progress! :lol: You dredge into getting the GC diagrams yet? I just got home from picking up printouts SHTBXR22 was kind enough to provide me of the STi harness.
So when do the pallets show up?
3pt0RS
06-04-2010, 11:17 AM
I have all the diagrams for the 94 the 02 rex and the 01 ez30. I'll have to call and see how the dismantling is going. I'd rather it be slow and complete than fast and trash.
Seraphinwolf
06-04-2010, 11:24 AM
+1! I'm glad at how cleanly removed my STi harness was. Especially for an ebay seller.
3pt0RS
06-22-2010, 11:53 PM
Started an Album for the long haul.....
Seraphinwolf
06-23-2010, 10:36 AM
So everything show up yet?
3pt0RS
06-23-2010, 10:43 AM
nope.....but the good thing is....they have my money...LOL!
Seraphinwolf
06-26-2010, 04:27 AM
Not to complicate the money end of the project but I found pistons and valves by Supertech and Cometic HG's for our engines...
:hide:
But you were staying NA weren't you?
3pt0RS
07-15-2010, 04:43 PM
So......when you call your engine supplier and get a "this number is no longer in service" message.....should i be concerned???
98Wagoon
07-15-2010, 04:52 PM
:palm:
3pt0RS
07-16-2010, 05:43 AM
looks like all is well.....phone system upgrade!
Seraphinwolf
07-16-2010, 07:07 AM
Close one... So STILL no engine and bits? That retarded!
Bu11dogg2
07-20-2010, 04:53 PM
updates?
3pt0RS
07-22-2010, 08:21 AM
Engine stuff might be showing up today. If so I plan to have this idling by morning :)
yes yes.....pictures
Seraphinwolf
07-22-2010, 08:41 AM
So you've had the wiring there to fiddle with and didn't filly us in?! Bastard! GL Joe!
3pt0RS
07-22-2010, 12:23 PM
No Gladdis......that was heavily laced with sarcasm. Maybe in a dream i have tonight though. As far as getting started my "divorce house" might be sold in a week or two which then unfortunately gives me the $$$ to quickly put up a second floor on my shack. All this just pushes back my EZGC :(
Seraphinwolf
07-22-2010, 05:25 PM
It's okay dude. You'll get it done. Remember when inhaf originally planned tonhavr mine done by? Yeah a long time ago...
mdungelman
07-24-2010, 11:12 AM
It's okay dude. You'll get it done. Remember when inhaf originally planned tonhavr mine done by? Yeah a long time ago...
You actually plan to finish it? I was more under the impression that you enjoy collecting parts so you can talk about them.:)
Seraphinwolf
07-24-2010, 05:20 PM
What? I can't enjoy that part while I head towards and end goal?
98Wagoon
07-25-2010, 02:25 AM
no.
:lol:
3pt0RS
07-26-2010, 07:10 PM
i'm years ahead compared to my last build......engine sat on the dining room table for years......before the wife left (can't imagine why)!
Bu11dogg2
07-29-2010, 10:40 AM
still looking for an sti cat back?
If RCKSTR doesn't want mine you can have it
3pt0RS
07-29-2010, 12:59 PM
I am.........and i just happen to have a 95 rear diff sitting im my garage
98Wagoon
08-18-2010, 12:03 AM
sooooo.... bamp.. and what, might I ask, is the availability and final drive of this here rear diff..... :hide:
Spilner
08-18-2010, 02:08 AM
If it came from an ej18 car it's 3.90
RCKSTR
08-18-2010, 02:15 AM
still looking for an sti cat back?
If RCKSTR doesn't want mine you can have it
Hey... I still want it :lol:
any more progress with the project?
98Wagoon
08-18-2010, 02:23 AM
Hey... I still want it :lol:
any more progress with the project?
I thought you got one! I'll wrassle you for it.... :lol:
3pt0RS
08-19-2010, 07:37 AM
Two strange men dropped a huge piece of aluminium in my Garage last night......
Seraphinwolf
08-19-2010, 07:50 AM
Only one?
3pt0RS
08-19-2010, 08:20 AM
how many is required?
Seraphinwolf
08-19-2010, 08:28 AM
Well was just hoping there was gonna be other packages with the engine. Aldo didn't know what else you were having dropped off with it.
3pt0RS
08-19-2010, 10:01 AM
this is the engine with all acc., complete wiring harness, ECU, EXHAUST UP TO THE CATS, motor mounts. I got it last night and haven't had time to inspect yet.
Seraphinwolf
08-19-2010, 10:19 AM
GET TO IT JOE!!!! And take lots of pictures. :o
3pt0RS
08-19-2010, 01:02 PM
Joe closed on house #1 yesterday....Hence I have the money to put second floor on house #2, Priorities just suck! Will commence ripping off the roof soon
3pt0RS
08-20-2010, 08:13 AM
those of you with an EZ30 sitting around.....whats the best position for temp storage when you don't have an engine stand?
98Wagoon
08-20-2010, 08:52 AM
gladdis has his on a custom "tire mount".. basically, sitting on a tire like it would be in the car.. :lol:
Seraphinwolf
08-20-2010, 09:21 AM
Hey tire keeps it level and just above ground level so it's not directly on said ground.
3pt0RS
08-21-2010, 08:21 PM
wow! thats one thick harness....can't imagine the EZ30dr
3pt0RS
08-21-2010, 08:27 PM
While this EZ30d is out of the Car does anyone need measurements or verification of anything....now is the time?
Seraphinwolf
08-21-2010, 10:46 PM
Ummm.... Lots of pics of the intake manifold? Allni really need off the D cause I'm back grading to the D manifold from the R.
3pt0RS
08-22-2010, 11:44 AM
ok Gladdis.....but its not coming off!
Seraphinwolf
08-22-2010, 06:31 PM
No? You sure? Sure you don't want to trade manifolds? :lol:
3pt0RS
08-23-2010, 08:01 AM
NO PLASTIC HANGERS!
3pt0RS
08-27-2010, 08:25 AM
The ECU came in last night....so for those thinking about doing this. I got a ~50k motor with ALL accessories and the full bulk head harness with zero cuts plus the ECU and the exhaust to the Y-pipe (both cats) for $1800 delivered to the door. This said, i'll have no idea if runs for a long time.....LOL!
Seraphinwolf
08-27-2010, 08:34 AM
Yeah one of the true killer deals!
Seraphinwolf
08-27-2010, 08:37 AM
How far into the wiring diagrams have you gotten anyways?
3pt0RS
08-27-2010, 10:30 PM
<---about this much minus 10--->
Seraphinwolf
08-27-2010, 11:01 PM
:lol:
So I forget are you DDing this car? If not, do you work Wednesdays? I might beable to come give a hand one of these weeks.
3pt0RS
08-28-2010, 05:29 AM
no way on the DDing. Just need that garage to hold all my stuff when we rip rhe roof of in 10 days or so.
Seraphinwolf
08-28-2010, 05:34 AM
What the Hell are you doing awake at 4:30 in the morning?
3pt0RS
08-28-2010, 07:25 AM
awake at 3 to be at work by 4.....the mail must move!
Seraphinwolf
08-28-2010, 07:35 AM
Ah... That would do it.
3pt0RS
09-01-2010, 09:53 AM
Did the plugs, oil and filter with a squirt in each of the cylinders for good measure. It turns over (with a wrench)....so atleast it's not seized....LOL
Seraphinwolf
09-01-2010, 05:03 PM
Good to hear. I keep forgetting to turn over mine. :-/ What are your plans cooling wise? Gonna run an external cooler off the filter lines? Or just let it be?
3pt0RS
09-01-2010, 08:25 PM
stock engine for now....just let it be
3pt0RS
09-02-2010, 02:31 PM
Gladdis....where is the lift point for the front of the engine....i got the back but i'm scratching my head for the rear???
thanks
Seraphinwolf
09-02-2010, 05:39 PM
Gaddis....where is the lift point for the front of the engine....i got the back but i'm scratching my head for the rear???
thanks
I'll take a look in a second. Need eat cereal... HUNGRY!!!! And need lotion on tattoo...
Seraphinwolf
09-02-2010, 05:47 PM
HereVvv
http://i307.photobucket.com/albums/nn281/seraphinwolf/Lilly%20AKA%20Project%20SixGun/8e4eabd1.jpg
Closer.
http://i307.photobucket.com/albums/nn281/seraphinwolf/Lilly%20AKA%20Project%20SixGun/4789b1d6.jpg
3pt0RS
09-02-2010, 09:35 PM
Ooops.....i meant i got that back hoop.....just not the front....Never Post and Drink....and then drink and post!
Seraphinwolf
09-02-2010, 10:19 PM
Oh. The bracket for the Alt is the point. I ended up using a threaded stalk and bending a hook out of it till I can get the rest of my brackets. :lol;
98Wagoon
09-02-2010, 10:22 PM
worst gladdis ever.
see you tomorrow Joe!
Seraphinwolf
09-02-2010, 11:00 PM
What's that rubbish Alex?
Seraphinwolf
09-04-2010, 11:46 PM
42 Motosports just finished a 30D swap. Sounds likentey used OBX single port header on it from what they said. Making 170ish whp. :) Motivation for ya?
3pt0RS
09-05-2010, 09:56 AM
I saw that too......I wish they had used the factory harness....then i could ask some questions on the hard part. I'm getting restless!!!
Seraphinwolf
09-05-2010, 10:14 AM
Well it's mostly just tying in the inputs and outputs for the ECU no? Most everything else should be just about thrown in a big bin. Where have you been focusing on? The ECU pin outs or the cluster?
3pt0RS
09-05-2010, 11:35 AM
Finishing the Garage and then tearing off the roof of the house :(
3pt0RS
09-05-2010, 09:25 PM
Put the Hoist up today.....makes it all so tempting
http://www.newenglandsubarus.com/forums/picture.php?albumid=221&pictureid=2051
98Wagoon
09-05-2010, 10:28 PM
dibs on using your garage to work on my car! :lol:
3pt0RS
09-05-2010, 10:31 PM
You already know what the price is!
98Wagoon
09-05-2010, 10:33 PM
good point.. haha. sent you an itrader thing for our transaction. oh, and I ended up with some more free parts after I left! I made out like a damn bandit this weekend... :devil:
04Wagoon
09-21-2010, 03:26 AM
good point.. haha. sent you an itrader thing for our transaction. oh, and I ended up with some more free parts after I left! I made out WITH a damn bandit this weekend... :devil:
fixed...
Seraphinwolf
10-07-2010, 09:19 AM
Anything new yet Joe?
Seraphinwolf
10-16-2010, 04:30 AM
:hide:
Anything? Knock knock?!
3pt0RS
10-16-2010, 02:36 PM
Very...very busy....the end is kinda insight!
3pt0RS
10-16-2010, 02:38 PM
http://rides.webshots.com/photo/2676732680065356192zDGCZo
3pt0RS
10-16-2010, 02:39 PM
to this
http://rides.webshots.com/photo/2018794620065356192RiXlao
squeethebee
10-16-2010, 02:45 PM
See no pics!!!
ed
RCKSTR
10-16-2010, 02:49 PM
from X to X :shrug:
3pt0RS
10-16-2010, 03:19 PM
crap
http://rides.webshots.com/photo/2676732680065356192zDGCZo
http://rides.webshots.com/photo/2018794620065356192RiXlao
squeethebee
10-16-2010, 03:28 PM
I see. Slightly more important then the car.
ed
Seraphinwolf
10-16-2010, 04:35 PM
Definately more! How was lastnight's weather with it's current status?
3pt0RS
10-16-2010, 08:49 PM
Rained when we took the old roof off (sucked) and then the big rain got in again .... under control and waiting for my metal roof to come in. Then get the EZGC inside with the engine.
98Wagoon
10-16-2010, 11:20 PM
hooray for second floor! glad to see its coming along, Joe!
Seraphinwolf
11-23-2010, 03:12 PM
Get anywhere Joe?
3pt0RS
12-10-2010, 12:15 PM
Between the upstairs and being a Postal Worker during the Holidays.....nada
http://thumb12.webshots.net/t/87/87/3/79/22/2537379220065356192FIdGvB_th.jpg (http://rides.webshots.com/photo/2537379220065356192FIdGvB)
98Wagoon
12-10-2010, 10:13 PM
house/roof look awesome Joe!
Seraphinwolf
02-16-2011, 02:50 PM
Booomp! Any updates Joe?
98Wagoon
02-16-2011, 08:40 PM
yeah jooooeeeee!!!???!?!??!?!
3pt0RS
03-03-2011, 09:48 PM
sleeping quietly in the garage.......
Seraphinwolf
03-03-2011, 10:23 PM
Awww... :( What kind of timeline do you have right now?
vBulletin® v3.8.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.