PDA

View Full Version : The Hybrid Wagon Build


Pages : [1] 2

AExiOn
03-18-2010, 09:33 PM
Hello, Am sure you've seen me whoring my self around the past month, and it dawned on me.. I haven't really posted any subaru related content.. Mostly because my wagon's engine shat the bed when I decided to **** around in a cul ve sac on newyears eve.. You can find this video of me destroying my wagon on youtube.. because of my awesome coworker who said he wouldn't, uploaded the video to the internets. I never said I was an intelligent person...

Anyways, we are assuming the engine spun its main bearing.. my engine sounds like this.. squeaking and all(not my car and or video I was talking about)
http://www.youtube.com/watch?v=VEIUDRDllOI

any ways.. about 1k after spending money on Tokico D-spec adjustable shocks, a rear hub assembly (rear driver tire has +4 camber), front control arm, wheel bearings, and throwing on the h-techs I bought in the summer. After driving home the engine took a turn for the worse.

So... the rebuild begins..

Here is or was... my front driver control arm
http://hphotos-snc3.fbcdn.net/hs454.snc3/25966_373216222581_650422581_3718955_6113414_n.jpg

Here is where the poor wagon sits now
http://photos-c.ak.fbcdn.net/hphotos-ak-ash1/hs474.ash1/25966_373216262581_650422581_3718957_7822897_n.jpg

Here is somthin for you pBear lovers
http://photos-d.ak.fbcdn.net/hphotos-ak-ash1/hs474.ash1/25966_373216287581_650422581_3718958_4327562_n.jpg

For the autocross/rallyX lovers out there
http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs474.snc3/25966_373216302581_650422581_3718959_8022490_n.jpg

The replacement STI EJ25 shortblock that was a victim to meth gone wrong
http://photos-c.ak.fbcdn.net/hphotos-ak-ash1/hs474.ash1/25966_373216307581_650422581_3718960_4707116_n.jpg

and here is me tea baggin my block
http://photos-f.ak.fbcdn.net/hphotos-ak-ash1/hs474.ash1/25966_373218487581_650422581_3719030_2052564_n.jpg

more to come I am sure

AExiOn
03-18-2010, 09:34 PM
I shal now copy pasta from a previous post that cannot be found here

AExiOn's 2002 WRX Wagon
Figure I put one of these up sense I got some pictures other than crappy cell phone pictures now

Mods (or other stuff) done so far [8-26-08]:

Cobb AP v2
XSPower 3" Cat less TBE
Exedy Stage1 Organic Clutch
Powerslot Front slotted rotors
Hawk HPS Front Pads
Tints 20/40 (previous owner mod)

**New as of 12-3-08**
Perrin up pipe (Installed in August 09 lol)
Cusco front strut tower bar
Whiteline quick disconnect wagon rear strut bar
KB Exhaust Hangers
K&N Drop in High Flow Air Filter


**New as of 1-30-09**
Whiteline 22mm Front Wagon Swaybar
Whiteline 24mm Rear Swaybar
Kartboy Endlinks
17" ADR Rims

**New as of 4-21-09**
4" Hood Scoop
Stock STI Boost gage
Headlights polished
JDM Rain guards
EFI Stage 2 STX Tune

**Newer to 2009 end**
STI TMIC
STI TMIC Splitter (modded to fit in the baby eater)
Modded TMIC Spray setup (Rear window wiper/sprayer disconnected. TMIC Sprayer connected to windshield washer tank where the rear spray pump is)
RE-070s 225/45/17
Morretts Head lights w/ HID kit
Car bling
Pedo Bear

NEW 3-2011
EFI Logics Built Hybrid engine
FP HTA68 Turbo


Stuff to come (in no order):
New stock hood(previous owner had some guy try to break into it, also rocks love to chip paint off of it.. No I don’t want carbon fiber)
New rear bumper or fix the scratches/marks on the current one(damn 18 year old mass holes that just got their license >.<)
Sedan Front bumper w/ Sedan Fenders
JDM STI 6speed powertrain
Oil pressure, Fuel pressure, air/fuel center dash gages.
New tints (originals was done in 2002 and is starting to bubble)


^^^^^^^^^^^
This is kinda outdated.. watching penguins vs bruins game right now to even care lol.. GO PENGUINS!

Stock days of late 07-very early 08
http://photos-b.ak.facebook.com/photos-ak-sf2p/v337/84/125/650422581/n650422581_825457_938.jpg
first time being parked in mi driveway
http://photos-d.ak.facebook.com/photos-ak-sf2p/v337/84/125/650422581/n650422581_825459_1669.jpg
http://photos-g.ak.facebook.com/photos-ak-sf2p/v310/84/125/650422581/n650422581_772646_3472.jpg
http://photos-h.ak.facebook.com/photos-ak-sf2p/v310/84/125/650422581/n650422581_772647_3832.jpg

Pre Moretts/painted headlights/baby eater days
http://photos-b.ak.facebook.com/photos-ak-snc1/v320/84/125/650422581/n650422581_818369_6023.jpg
http://photos-c.ak.facebook.com/photos-ak-snc1/v320/84/125/650422581/n650422581_818370_6283.jpg
Night of Trust(rob) from EFI doing my Timing Belt
Pre Moretts/baby eater days
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v350/84/125/650422581/n650422581_1011198_613.jpg
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2716/84/125/650422581/n650422581_1651279_6723433.jpg
Getting tuned at EFI
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2716/84/125/650422581/n650422581_1668058_3558400.jpg

http://www.youtube.com/watch?v=WWPCw5oapms

AExiOn
03-18-2010, 09:35 PM
Some crap from up to the car went kaput
I had this all typed out until some how I refreshed the page and lost everything.. so here I go again >.<

Autocross videos from last year
http://s127.photobucket.com/albums/p129/crapman_photos/DEVENS%206-7-09/ Devens Loffer co drove the car, and another friend took his last runs in it sense he broke a droplink

http://s127.photobucket.com/albums/p129/crapman_photos/autox%207-26-09/ CART Hartford lot videos (others too, last video is in eric's wrx and missing bolts in his seat)

http://s127.photobucket.com/albums/p129/crapman_photos/autox%205-3-09/ CART Bristol lot (Raincross day)
http://hphotos-snc1.fbcdn.net/hs035.snc1/3271_72217547581_650422581_1758635_3559898_n.jpg


Carbling! (Random 14k gold bracelet I found in a parking lot, god i love willimantic)
http://hphotos-snc1.fbcdn.net/hs006.snc1/4166_77287412581_650422581_1831625_3810462_n.jpg
From one of those adam gerage days where he does awkward things to me
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2716/84/125/650422581/n650422581_1671644_1274777.jpg
Now for nonsense
http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2390/84/125/650422581/n650422581_1524268_3107114.jpg
Painting of the baby eater
http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2716/84/125/650422581/n650422581_1671632_4445890.jpg
http://hphotos-snc1.fbcdn.net/hs035.snc1/3271_66074117581_650422581_1680036_7527833_n.jpg
At the last WBM I was on the sky lift, Richie and Boostinbildo passed us. Then told me I should go check out my car in the parking lot..
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs084.snc1/4773_89308852581_650422581_1991633_3020453_n.jpg
http://hphotos-snc1.fbcdn.net/hs104.snc1/4773_89308867581_650422581_1991635_871592_n.jpg
There was painters tape and a caption that read, "The battle of baby eater hill!" Thanks guys lol

18 wheel death
03-18-2010, 09:51 PM
good to see you tea bagging your block. The naysayers and assumers can stick that in their downpipe and smoke it.

Bu11dogg2
03-19-2010, 07:53 PM
I love it :)

boxxer joe
03-19-2010, 09:12 PM
art im glad that block is going to good use after it colected dust in the basement lol we need to get that thing running i want to go for a ride:bull:

AExiOn
03-20-2010, 07:58 PM
art im glad that block is going to good use after it colected dust in the basement lol we need to get that thing running i want to go for a ride:bull:

Thanks for the block man, today I wanted to atleast start preping the removal but.. I am hungover to the max right now

good to see you tea bagging your block. The naysayers and assumers can stick that in their downpipe and smoke it.
:rofl: :RCKSTR::RCKSTR::RCKSTR::RCKSTR::RCKSTR:

Updated the 3rd reserve spot

AExiOn
05-16-2010, 02:25 AM
Thanks to taco, the engine is out of the car.

Its been a fun day. LETS GO TO SEARS!! :lol:


Time to spend awful amounts of money for the hybrid build and to destroy the tranny

tacoornot
05-18-2010, 10:42 AM
You can't go in the out!
.............
Hahahaha

Danie? Nope. Can't find facebook.
Did you stare at her name tag? I did.
What did you find?

AExiOn
05-18-2010, 10:47 AM
You can't go in the out!
.............
Hahahaha
thats not what she said!!!

Danie? Nope. Can't find facebook.
Did you stare at her name tag? I did.
What did you find?
Megan :rofl:

So are we going back to Sears today??
I want to wuss out and not ask her for her number again

Where is my pedo picture and my foam hat picture?? :rofl:

Berge56
05-18-2010, 11:08 AM
sears stalking eh... Classic! :lol:

tacoornot
05-18-2010, 11:11 AM
http://i400.photobucket.com/albums/pp82/tacoornot/utf-8BSU1HMDAwNDAuanBn.jpg
http://i400.photobucket.com/albums/pp82/tacoornot/utf-8BSU1HMDAwMzkuanBn.jpg

AExiOn
05-18-2010, 11:34 AM
sears stalking eh... Classic! :lol:


More of Taco finding excuses to go

Just so he can make an ass out of me

"Go ask her for her facebook page"
:palm:


I think today we are returning taco's broken torque wrench :rofl:

Bu11dogg2
05-18-2010, 12:29 PM
updates

AExiOn
05-18-2010, 12:44 PM
the engine is out of the wagon.. FINALY

Taco said hes gana come by and help me tear it apart, then I can finaly get it to a machine shop to get the heads and the sti block to be worked on

Now I got to build up a list of what parts am going to go with. I may do a STI turbo for right now.

However tyler wants to clean out my garage, I have alot of old crap in there that either came from my mom or dad, or dead relatives.

Taco just appeared out of the blue at my house yesterday, deal is if he helps me clean it, he can use it when ever. So after 60 bottles of used oil, 4 used batteries, bunch of old books, clothes, and random stuff in avon boxes that we dumped into a good will clothing bin, and moving stuff to the garage attic, we made a small dent in it lol
We found a bunch of old crap yesterday. My old shifter from my 86 cellica supra that am putting in the wagon, wood grain ftw!!


Maybe I'll take some pictures tonight of the engine on the stand, the still messy garage, and a bunch of mouse crap

05Rex
05-18-2010, 02:39 PM
about time you pulled the motor!!! like i said before if you guys need a hand, or just some fat guy in the garage drinking and making fun of you im always down to lend a hand.

oh and thanks for the voicemail the other day. i understand i still have about 4k rpms left when i shift but im a fan of getting over 15 mpg and when i go past 7k i get between 10-12

AExiOn
05-18-2010, 04:02 PM
lol

Tyler wanted me to say it

But we just wanted to show you some love sense we saw ya in town :D

AExiOn
05-20-2010, 09:57 PM
Some pictures of junk, car parts, old things found, and a work bench that hasn't been cleared in over 8 years

btw, I cant keep my arms/hands still while taking pictures

http://hphotos-snc3.fbcdn.net/hs607.snc3/31968_391458102581_650422581_4152777_4668535_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs637.snc3/31968_391458117581_650422581_4152778_1434738_n.jpg
http://hphotos-snc3.fbcdn.net/hs607.snc3/31968_391458132581_650422581_4152779_2170833_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs607.snc3/31968_391458147581_650422581_4152780_522204_n.jpg
http://hphotos-snc3.fbcdn.net/hs637.snc3/31968_391458172581_650422581_4152781_3740521_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs637.snc3/31968_391458707581_650422581_4152786_3290077_n.jpg
http://hphotos-snc3.fbcdn.net/hs607.snc3/31968_391458727581_650422581_4152787_3531063_n.jpg
http://hphotos-sjc1.fbcdn.net/hs607.snc3/31968_391458737581_650422581_4152788_2960658_n.jpg

ok now to create another photobucket account to upload videos

RCKSTR
05-20-2010, 10:09 PM
Very nice :spin:

bigd_wright
05-20-2010, 10:17 PM
Cant wait to see it all back together! Nice build you got on your hands!:up:

AExiOn
05-20-2010, 10:46 PM
Thanks to both of ya, I really cant wait to get it back on the road
What ever day of this year it is, is how long I haven't drove my car
Big props to tacoornot, with out him I'd be dishing out insane amounts of cash, though he gets the usage of the garage when ever he wants out of this. Along with stock wrx suspension if he still wants it lol

I just went through the videos before uploading them..

Wow we where kinda drunk while doing this..

Videos are still uploading as I am making this post, there are 11 videos in total. Some of it is just stupid ****.

http://s951.photobucket.com/albums/ad354/omgaexion/

Highlights are..
Tacoornot video taping me smashing **** with a crowbar while talking **** about ********* while wearing their tshirt
Tacoornot asking what I think about the ctfriend's owners part company lip I have
Me video taping tacoornot doing all the work
Tacoornot climbing a ladder while drinking
Tacoornot calling adam a homo because we love him and his shenanagans
Me not giving a crap about a big oil spill on the floor
Me being gay
and me going through old children's jesus books that I found.. I am a big athiest


I wouldn't watch any of these videos while at work, we have been drinking and swearing
or if your like me and dont care what you look at, while at work. Have away!

boxxer joe
05-21-2010, 07:08 PM
hey Art i gave you the botom end so i get to dive it rite???:lol: i need to get over there havnt hung out in forever

Berge56
05-21-2010, 08:13 PM
nice work art!

AExiOn
06-23-2010, 11:04 PM
Engine parts are packed into the astro

On its way to EFI tomorrow!!!!

Maybe ill have her back on the road before fall :lol:

More than 6 months without your car is VERY painful!!

Kojak77
06-24-2010, 10:06 AM
Maybe Trust will Tea-bag your motor for good luck. :lol:

CTATV
06-24-2010, 10:54 AM
somebody link destroying video please...

AExiOn
06-25-2010, 09:03 AM
somebody link destroying video please...

http://i951.photobucket.com/albums/ad354/omgaexion/th_MPEG0004.jpg (http://s951.photobucket.com/albums/ad354/omgaexion/?action=view&current=MPEG0004.flv)

I think I was about 5 beers in within a little over an hour period


If your looking for the video that started all of this bull **** to begin with

http://i25.photobucket.com/albums/c57/aexion/th_Artmessesupcar.jpg (http://s25.photobucket.com/albums/c57/aexion/?action=view&current=Artmessesupcar.flv)
^^^^^^^^^^^^^ Equals
http://hphotos-snc3.fbcdn.net/hs454.snc3/25966_373216222581_650422581_3718955_6113414_n.jpg

That about about 6 months and 25 days ago :unamused:
I still need to dig up that ****ing curb

Maybe Trust will Tea-bag your motor for good luck. :lol:

I hope he does!! Its like sticking gum to something for good luck but better!

98Wagoon
09-09-2010, 07:43 PM
arthur, I demand an update.

AExiOn
09-09-2010, 08:31 PM
I paid $500 on it today

I owe $1600 left out of near $5000

Rob is on vacation this week :rofl:
As soon as its on a stand at EFI and looks complete I'll snap a picture or two. I guess rob has some secret plans for me, and wont tell me


Every time I go to the garage to dispense empty beer bottles, I talk to my car.
I touch her, I rub her, I tell her its going to be ok, she will be complete again


This new Hybrid Engine from EFI Logics better be freaking amazing.. and do my laundry, give me sex when I ask for it, and cook me dinner!! :unamused:

The 2.5 block that I had was really bad, Rob and Pete convinced me to get a new 09 sti short block. I am still deciding if I should spend the money on a VF39 or its 07 counter part, or just spend the coin to get a HTA68 that I will eventually will do anyways.

I have an eye on a STI oilpan w/ baffle, along with thinking about ordering a Perrin Fuel rail system from Subimods

I am almost to the point where I am going to give my tranny a middle finger before it has the chance to give me one, and just get the HTA68

Take that 5 speed!!

Also with this post its been 9 months 9 days sense I really DROVE my car

I am not counting the time where I drove it back from rokkits house, and discovering i spun a bearing sense the "mishap"

98Wagoon
09-09-2010, 08:46 PM
ughh.. sucks. so hopefully its not going to be MUCH longer.. my brothers 04 wrx wagon spun a bearing.. or something.. a few weeks ago. we're gonna go hybrid with it.. but.. we hope it goes quicker than yours :hide: whats left to do on it? just drop the engine in and wire it back up?

AExiOn
09-09-2010, 08:56 PM
pretty much
I have an STI fuel pump that am too lazy to install lol
Turbo
Getting the engine paid off, and rob finishing it

Then its a drop in and go..... to rokkits house so he can help pop in a new rear driver hub assembly and bearing because my rear driver tire still has +4 positive camber

So hopefully around the time I broke it, It will be back on the road :lol:

Though I will take bets on when the tranny is going to die :D
Because why wouldn't it

98Wagoon
09-09-2010, 09:00 PM
well hurry up! haha..

I give mine about 3-4 months after I (someday) do my swap.. tranny from a brighton + stg 3+wrx engine = faaaiiilllllll

AExiOn
09-09-2010, 10:01 PM
lol am trying!

that sucks about your bros car though
Freaking ubarus and their spinning bearings and weak trannies :unamused:

Every one should have an STI oil pan, oil pump, and freaking oil gauge to make sure pressure never drops

Though am sure it will still find a way to spin

98Wagoon
09-09-2010, 10:09 PM
and how. theres an sti oil pan for sale on here that Im picking up, when I build my 2.0 Im putting the 08+ stil oil pump (11mm) JUST to make sure I dont choke it out and kill it.

tacoornot
09-09-2010, 11:52 PM
pics or it never happened :tumbleweed:

AExiOn
09-10-2010, 09:15 AM
You never happened!

http://i127.photobucket.com/albums/p129/crapman_photos/oops/263600839813.jpg


So when are YOU fixing the Z

Berge56
09-10-2010, 10:26 AM
looks like he is fixing the headlight. :lol:

98Wagoon
09-10-2010, 11:22 AM
it takes talent to teabag a headlight, while working on the car and talking on a cellphone all at the same time.

AExiOn
09-10-2010, 12:33 PM
Its his normal squating position when working on cars

AExiOn
09-27-2010, 01:22 PM
Well last thursday I saw my new engine for the first time ever!!!!

...



...



...





in the box... :rofl:


Trust said he was going to be building it this week..

Then Chris came in a short while later and told me I was an week early

Then Pete came in after chris about 10 mins later, and told me trust has been pushing to get it finished

:rofl::rofl::rofl::rofl:

Doping off the fuel rails soon, decided to go with Agency Power

now to shop for a turbo and break my walet more :(


IT WILL BE DONE BEFORE THANKSGIVING!!


or am hanging my self in the gerage...

Berge56
09-27-2010, 02:05 PM
Great update Art! What are you looking for from a power perspective?

AExiOn
09-27-2010, 03:07 PM
Something that will give the middlefinger to my 5 speed

So am thinking HTA68

Berge56
09-27-2010, 03:42 PM
Something that will give the middlefinger to my 5 speed

So am thinking HTA68

:rofl: but then your car would be out of commission again! How does the hta compare to a 20g on the 2.5 hybrid?

AExiOn
09-27-2010, 04:17 PM
I could do something like this
http://newhaven.craigslist.org/cto/1970148913.html

Co worker just set that to me, asking me how much a new tranny would be. After reading the add, I couldnt stop laughing.. Then though oh wait thats going to be me in 4 months :rofl:

Atleast am expecting it to happen.

From the few graphs I found on EFI's website

Ill be 270-310 wheel and torque

Berge56
09-27-2010, 04:39 PM
Sweet! Your going 6 speed?

That craigslist seems to be a good deal.

AExiOn
09-27-2010, 04:44 PM
yeah eventualy am going 6 speed.. I have no choice

If I want this thing to last into 2015+
It must be bullet proof, and or have lasers to shoot oncoming cars that will crash into you.. I figured the 6 speed first

Berge56
09-27-2010, 04:59 PM
When you figure out the laser thing count me in. Maybe we cna do a group buy on lasers! :lol:

yaya
09-27-2010, 04:59 PM
What made you decide to do the fuel rails? I've been researching this quite a bit lately but might just end up modding my OEM rails to be parallel to keep it on the cheaper side.

AExiOn
09-27-2010, 05:09 PM
Wanted to go parallel, dont want to lean out and destroy my investment any time soon.. If I did that I think I just say F cars and find a Chevy/Suzuki Tracker/Sidekick that I know I can run 2 quarts low and beat the crap out of it and not have it break :lol:

didn't know you can mod the oem ones :lol:
I already got mine, but do tell about this oem mod

yaya
09-27-2010, 06:13 PM
I've been talking through pm's with some people about how they've set theirs up. Let me see if I can find some threads that show how to do it and I'll post a link and some more detailed info in here.

I was building out a setup with aeromotive rails/fpr and braided lines with -an fittings... holy crap it got too expensive fast.

AExiOn
09-27-2010, 06:17 PM
Yeah EFI has their own fuel rail kit, but its in the 4 digit range of price

I got my AP Fuel rails for around $300
figured it wasn't too bad, whats really going to hurt me and set me back is going to be a brand new spankin turbo. I cant see my self buying an older turbo for a brand new engine.

If I did that I might as well use used pistons and a shortblock

yaya
09-27-2010, 06:25 PM
I hear you dude. And, $300 isn't a bad price at all. Whenever I see the Perrin V1 rails pop up used on nasioc I always consider picking them up. Agency Power or TurboXS seem to be in the same ballpark.

AExiOn
09-27-2010, 06:28 PM
I've seen the Perrin ones at subi mods

all the hoses spin on the fittings, kinda scared me on how long it would last, why I went with AP

solid fitting, no spinning :lol:

Kojak77
09-27-2010, 07:43 PM
LONG LIVE THE BABY EATER!!!

AExiOn
09-27-2010, 08:05 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs035.snc1/3271_66074117581_650422581_1680036_7527833_n.jpg

98Wagoon
09-28-2010, 10:23 PM
when you hang yrself in the garage (ok fine, IF) can I has baby-eating car? :hide:











glad to hear the progress, finally! how long are they saying its going to take to bolt the engine together?

yaya
09-29-2010, 02:19 PM
Art, here are some of the threads I've come across on parallel rails and setting up your own. I'm pretty sure it's slightly different for WRX rails vs. STI rails as the fpr is on the end of one of the rails on a WRX. So generally you have to use a second set of oem rails and an adjustable fpr.

The basics are that you tee the fuel delivery line and route those lines to the front of the rails, then the return lines out the back of the rails go to the fpr and back to the factory return line.

scoobymods - series to parallel
http://www.scoobymods.com/series-parallel-fuel-delivery-modification-t175.html?t=175&highlight=fuel

nasioc - fuel line routing
http://forums.nasioc.com/forums/showthread.php?t=1462667

nasioc - custom ej20g setup
http://forums.nasioc.com/forums/showthread.php?t=1909985

nasioc - parallel vs. series
http://forums.nasioc.com/forums/showthread.php?t=1934936

AExiOn
10-14-2010, 05:29 PM
Thanks for the info yaya! I never posted a thankyou after ya posted :p



HEY LOOK!!!

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs448.ash2/72107_439418792581_650422581_5350613_6150219_n.jpg


a ****ing engine!

Bu11dogg2
10-14-2010, 05:33 PM
I could do something like this
http://newhaven.craigslist.org/cto/1970148913.html

Co worker just set that to me, asking me how much a new tranny would be. After reading the add, I couldnt stop laughing.. Then though oh wait thats going to be me in 4 months :rofl:

Atleast am expecting it to happen.

From the few graphs I found on EFI's website

Ill be 270-310 wheel and torque


say what?

I made 298 with 2.0 ;)

with a hybrid, HTA68, intake, headers, cat back you will be in thh 310/330 range

Bu11dogg2
10-14-2010, 05:35 PM
oh, and why are you changing fuel rails?

AExiOn
10-14-2010, 05:57 PM
oh, and why are you changing fuel rails?


So I dont lean out the engine

equal fuel to all 4 cylenders = happy engine

Also why I am going with an STI oil pan and baffle

Non sloshing oil pan = no oil starvation = not spinning a bearing

Really Rob is telling me to do things and I am doing it :rofl:


He calls my engine Joan...

Joan of Art

Bu11dogg2
10-14-2010, 06:22 PM
Is there an issue with hybrids and leaning out?

AExiOn
10-14-2010, 07:44 PM
nah just subaru engines in general

4th cylinder likes to lean out, then again, if anything was at the end of a series circuit, its gana get the **** end of the stick


Wanted to take steps for a long lasting engine that I can beat the hell out of during autocross

boxxer joe
10-14-2010, 09:17 PM
yeah remember that block i gave you art #4 looked nice and cooked. i love subies but they are so picky when you run them hard

Bu11dogg2
10-14-2010, 10:35 PM
I know where that is :wub:

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs448.ash2/72107_439418792581_650422581_5350613_6150219_n.jpg

yaya
10-15-2010, 09:52 AM
Woohoo! Progress!

:squee:

tacoornot
10-15-2010, 11:15 AM
Charles forgot he had your bypass valve...lol

****, this means I need to buy a front O2 sensor

AExiOn
10-15-2010, 11:19 AM
Charles forgot he had your bypass valve...lol

****, this means I need to buy a front O2 sensor


yeah its time for you bastards to give me my **** back

He also has my turbo oil feed line or was it my banjo bolt.. hmmmm

Berge56
10-15-2010, 11:43 AM
sweet you give them old parts and you get new in return?

AExiOn
10-15-2010, 11:44 AM
kinda

more of

Hey Art, your car is broken, and wont be fixed for a while... Let me use parts from your car..

or

Taco: Hey, I am in your gerage, grabing your O2 sensor

Berge56
10-26-2010, 03:16 PM
So any updates???

Hero
10-26-2010, 03:19 PM
I know where that is :wub:

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs448.ash2/72107_439418792581_650422581_5350613_6150219_n.jpg

think i do too :D

CTATV
10-26-2010, 03:21 PM
I saw it last week. didnt know that was your motor should have asked rob

AExiOn
10-26-2010, 03:47 PM
Taco almost pulled one over on me

He said that Rob dropped my engine on his leg, and he broke it.

I texted Rob, and he said he fell down some stares...


Though ****ty for rob, it would of been an awesome joke that my engine is a leg breaker

Berge56
10-26-2010, 03:52 PM
so wait rob has a broken leg?

Bu11dogg2
10-26-2010, 03:57 PM
yeah make with the info!

AExiOn
10-26-2010, 04:04 PM
He slipped and fell down the stairs.

So I assume his leg is broken or ****ed up

tacoornot
10-26-2010, 04:31 PM
Rob broke his ****...

Hero
10-26-2010, 04:39 PM
Rob broke his ****...

What?!- When did this happen? :(

AExiOn
10-26-2010, 04:40 PM
no idea..

past few days

I'll get the full story out of him when I see him thursday

Berge56
10-26-2010, 04:50 PM
damn! Tell that mofo to be more careful and to get better.

AExiOn
10-29-2010, 09:21 AM
He fell down the stairs at his apt. and well, missed a step, and went tumbling..


Then he drove to the hospital with a broken left leg

great for shifting


Chris got him a rental thats automatic.. KIA FORTE!!!!

Kojak77
10-29-2010, 09:27 AM
Next time get some pics of Rob and the Kia.

He must be pretty pissed off about the whole thing.:lol:

AExiOn
11-10-2010, 10:43 AM
Next time get some pics of Rob and the Kia.

He must be pretty pissed off about the whole thing.:lol:


That I will do

Yeah hes not happy.

Inlet, Fuel rails, FP HTA68, FP oil feed line all paid for!!! THANKS SUBIMODS!!

now to finish paying the last amounts to EFI and everyting is paid for.. finaly.. I may actualy try to save money now and pay bills ontime for once :rofl:

Berge56
11-10-2010, 11:02 AM
ETA for the wagon to be back on the road?

AExiOn
11-10-2010, 11:12 AM
ETA is soon

Berge56
11-10-2010, 11:13 AM
how soon??? like are we almost there yet soon? Or we just started the trip soon?

yaya
11-10-2010, 11:14 AM
Who's will be done first?

AExiOn
11-10-2010, 11:25 AM
how soon??? like are we almost there yet soon? Or we just started the trip soon?

If I gave you a date and if I missed it, I would only be disapointing you :D

Soon as in, me getting the parts to rob, him doing the finishing touches, and me giving taco beer in my cold ass gerage that lacks heat.

More or less its a rush to get it done before thanksgiving

Who's will be done first?


Well my fine sir, if you factor in how long my car has been on jack stands, I think you won :rofl:

Berge56
11-10-2010, 11:27 AM
Well my fine sir, if you factor in how long my car has been on jack stands, I think you won :rofl:

:rofl::rofl::rofl:

yaya
11-10-2010, 11:31 AM
If I gave you a date and if I missed it, I would only be disapointing you :D

Soon as in, me getting the parts to rob, him doing the finishing touches, and me giving taco beer in my cold ass gerage that lacks heat.

More or less its a rush to get it done before thanksgiving




Well my fine sir, if you factor in how long my car has been on jack stands, I think you won :rofl:

:rofl:

If you add up all the times my car has been down for motor issues in the last 2 years it gets pretty close I bet.

Regardless, this will be a hell of a fun ride for you once it's up and running.

AExiOn
11-10-2010, 11:40 AM
so its neck and neck now :rofl:
First one to get the car working before thanksgiving wins!!! If we get it on the road afterwards.. We both lost the game

I really can't wait to get it back on the road, and finaly wash last winter's grime off so I can get this years grime all over it :palm:

Kojak77
11-10-2010, 12:13 PM
Is the motor still at EFI?

Sweaty and I will be down there tommorow.

AExiOn
11-10-2010, 12:27 PM
yep, its down there

Am still trying to think how I am going to cart it home..

I guess lay it down on its back side where the clutch goes..

That reminds me that I need a flywheel :rofl:

AExiOn
11-14-2010, 12:06 PM
Before you see the picture, I had no idea what Rob was doing down at EFI
Infact! He was hiding stuff when ever I came to the shop so I wouldn't see the intake manifold, etc. Rob went out of his way to make this look the way it is and stayed late one night cleaning the hell out of the engine. Rob is the man, and if your looking to get an engine built go see him at EFI. This guy is a freaking genius!!

ok here it is..



































































































http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1119.snc4/148179_10150137347912977_590267976_7824206_6283894 _n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs951.snc4/74487_10150137356242977_590267976_7824249_7850198_ n.jpg

I want it to be inside me

yaya
11-14-2010, 12:50 PM
Looks awesome!

98Wagoon
11-14-2010, 10:08 PM
I came when I saw that engine. jussayinn.

hiprsha666
11-14-2010, 10:35 PM
That engine looks awesome dude.

tacoornot
11-14-2010, 10:44 PM
Umm rob, art doesn't like blue.....

RCKSTR
11-14-2010, 10:47 PM
Umm rob, art doesn't like blue.....

:rofl:

looks great :up: so now it's just install time??

Berge56
11-15-2010, 09:50 AM
Looks amazazing! Install before thanksgiving?

squeethebee
11-15-2010, 10:14 AM
Looks very glossy. I echo everyone else when I ask when is it going in?

ed

AExiOn
11-15-2010, 10:20 AM
Umm rob, art doesn't like blue.....

But his car is blue!

Yeah, notice how long it took for him to fix it!

Looks very glossy.
It is, though Rob spent a night grinding the metal down that gives this etched gloss look, hard to explain and the picture dosn't do justice. I still can't believe its my engine


For the install time, I am shooting before thanksgiving. Maybe next weekend? Soon as I confrim some things ill post a date, people are welcome to come over, drink beer, and all cuddle togeather in the gerage so we can all stay warm.

Taco needs your body heat

tacoornot
11-15-2010, 10:49 AM
I said I would pull the motor.... Not put it in...get your own mechanic!

Kojak77
11-15-2010, 11:40 AM
It looks awesome in person.

When I was at EFI in July, Rob was talking about all the custom **** he was going to do to your motor, he made me promise not to tell you. Then he told me that he'd kill me if I did, and I believe him, although I could out run him in his current state. :lol:

Let me know when you're installing this, I'd like to stand there and drink beer while you guys work on this.

AExiOn
11-15-2010, 11:58 AM
I said I would pull the motor.... Not put it in...get your own mechanic!

How many more times do I need to fix your rents laptop for the motor to go in? :D

Let me know when you're installing this, I'd like to stand there and drink beer while you guys work on this.

will do, we could use a guy drinking a **** load of beer!

Berge56
11-15-2010, 12:11 PM
Where is the motor install going down? I may be available for some beer drinking and ponting obvious things out.

AExiOn
11-15-2010, 12:15 PM
My hizhouse.

If you ever been to adam's house, its 3 or so miles away in the cool side of town.
Where the water is tainted with awesomeness

yaya
11-15-2010, 12:16 PM
This is gonna be a close one...

AExiOn
11-15-2010, 12:17 PM
am i winning?

yaya
11-15-2010, 12:19 PM
Your motor is done, mine is not. I don't have a date yet, but am hopeful for this week.

Berge56
11-15-2010, 12:20 PM
yea it is! :munch:

AExiOn
11-15-2010, 12:38 PM
well, its not completely done

I hope rob has it done this week

Then again the wagon wont be completed and road ready till I can drive it to rokkits and have him use his supper duper press to replace the rear hub assembly/wheel bearing

I think I used all my free AAA toes this year :rofl:

Berge56
11-15-2010, 12:45 PM
remove hub and bring to rockkit now.

yaya
11-15-2010, 12:49 PM
well, its not completely done

I hope rob has it done this week

Then again the wagon wont be completed and road ready till I can drive it to rokkits and have him use his supper duper press to replace the rear hub assembly/wheel bearing

I think I used all my free AAA toes this year :rofl:

I have a spare rear hub with bearing... :D

I used Berges free AAA tow :hide:

Bu11dogg2
11-15-2010, 01:19 PM
Last time I was there Rob showed me and Berge56 the blue intake :lol:

I didn't put 2 and 2 together until now :lol:

AExiOn
11-15-2010, 02:00 PM
I also saw the parts but it wasn't on the engine yet and I had no idea, and rob was hiding parts and throwing rags over them when I showed up



You bastards saw more of my engine coming togeather than I did, and I was there every other week :rofl:

Berge56
11-15-2010, 02:23 PM
:D

Bu11dogg2
11-15-2010, 02:35 PM
Berge knew the whole time :lol:

Berge56
11-15-2010, 02:43 PM
:hide:

AExiOn
11-15-2010, 02:53 PM
:rofl:

bastards are all in on it!! I swear!!

AExiOn
11-16-2010, 05:02 PM
Buddy on facebook after me commenting on his tune video at efi he just got:

"I have a picture I want to upload but I dont want to ruien the suprise"

I then told him I already saw my engine and then I was tagged in a newly uploaded photo

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1130.snc4/149284_1447081067974_1561590013_30998744_6779152_n .jpg

Little bit better than the cellphone pics from before

Berge56
11-16-2010, 05:11 PM
the intake manifold looks really cool.

AExiOn
11-16-2010, 05:16 PM
I've decided to only keep the engine clean on the whole car, inside and out

Just for the mind ****

boxxer joe
11-16-2010, 05:30 PM
sick man robs the best

yaya
11-23-2010, 04:44 PM
First one to get the car working before thanksgiving wins!!! If we get it on the road afterwards.. We both lost the game

So, are we both losing?

AExiOn
11-23-2010, 04:59 PM
So, are we both losing?


Yep lol

I havent heard anything from EFI, I dont want to be that guy and calls them every day asking if its ready yet :rofl:

Though I did see Jack on his way to work this morning on the highway, and yet again he was in his own world driving along and did not see the wave :lol:

Bu11dogg2
11-23-2010, 05:00 PM
can't rush perfection

AExiOn
11-23-2010, 05:03 PM
nope ya cant, though its just about finished, just some small things and me giving them $700 to finish off the bill

Kojak77
11-23-2010, 06:53 PM
You should bring Rob a sandwich too. He like those. :lol:

Berge56
12-07-2010, 02:39 PM
Any updates Art?

Bu11dogg2
12-07-2010, 03:16 PM
What turbo are you gonna run?

Psychoreo
12-07-2010, 03:31 PM
Rumor mill saez HTA68

tacoornot
12-07-2010, 05:36 PM
Td04

AExiOn
12-07-2010, 05:40 PM
Td04


Hes right

almost

its a td02 <-- hits full spool at idle

and I got to wait another year

Bu11dogg2
12-07-2010, 05:41 PM
:lol:

Kojak77
12-13-2010, 11:07 AM
Any updates?

Berge56
01-13-2011, 12:25 PM
So when are you picking up the motor?

AExiOn
01-13-2011, 12:41 PM
Today. Am down in that part of the state

Berge56
01-13-2011, 12:47 PM
Sweet!!! Motor install this weekend?

AExiOn
01-13-2011, 12:49 PM
Sweet!!! Motor install this weekend?

Haha I wish...

yaya
01-13-2011, 12:53 PM
How long before you drop it in then?

AExiOn
01-13-2011, 12:55 PM
When taco is able.

tacoornot
01-13-2011, 02:21 PM
Taco will need beer.

AExiOn
01-13-2011, 09:18 PM
Yes beer will be had

Only if we follow trust's directions

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs792.ash1/168281_486776302581_650422581_6086063_7289418_n.jp g

Psychoreo
01-14-2011, 02:56 AM
http://www.dirtyimpreza.com/forums/images/smilies/jack.gif

Berge56
01-14-2011, 09:48 AM
Yes beer will be had

Only if we follow trust's directions

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs792.ash1/168281_486776302581_650422581_6086063_7289418_n.jp g


What about boost??!!! Can you run any during break in?

AExiOn
01-14-2011, 09:49 AM
What about boost??!!! Can you run any during break in?

see #13

Then reference #8 again

Berge56
01-14-2011, 09:59 AM
#8 is my favorite!

I will see Rob on Tuesday. I have to bring my turbo down and talk to Chris and Rob about some stuff.

yaya
01-14-2011, 10:02 AM
Seems like a waste of a perfectly good goat.

AExiOn
01-14-2011, 11:19 AM
You saying my wagon is not good enough for a good ole fashion small goat sacrifice? :unamused:

CTATV
01-14-2011, 11:23 AM
Yep lol

I havent heard anything from EFI, I dont want to be that guy and calls them every day asking if its ready yet :rofl:

Though I did see Jack on his way to work this morning on the highway, and yet again he was in his own world driving along and did not see the wave :lol:

:lol:

I see Rob on 84 on his way home from work from time to time. I always pull up next to him and honk then drop into forth and and take off :rofl:

yaya
01-14-2011, 11:35 AM
You saying my wagon is not good enough for a good ole fashion small goat sacrifice? :unamused:

Just seems like you could find a larger animal... Maybe a cow. Would leave you with much more meat too. Babies are fair game though.

AExiOn
01-14-2011, 11:41 AM
Friends and I last night did discussed about showing up at EFI, with pictures of babies with black eyes, and a goats head when doing the 500 mile checkup

I also tagged the Slow watch for children sign in Rob's bay

yaya
01-14-2011, 11:53 AM
Do eet!

And photos and/or video are a must.

CTATV
01-14-2011, 11:55 AM
Friends and I last night did discussed about showing up at EFI, with pictures of babies with black eyes, and a goats head when doing the 500 mile checkup

I also tagged the Slow watch for children sign in Rob's bay

wait is your motor in your car? 500 mile checkup?

AExiOn
01-14-2011, 12:00 PM
nah motor is not in the car

Rob asked me to swing down to efi just so he can see how the joan of art is doing

He said he was sad to see it go, it made his bay look perty

Berge56
01-14-2011, 12:16 PM
haha I bet. He spent alot of time on your motor.

BogeyBones
01-14-2011, 12:43 PM
Does this count as a goat sacrifice?

5_TbyMotG1g

AExiOn
01-14-2011, 01:07 PM
lol maybe

CTATV
01-14-2011, 01:09 PM
did he drop the tranny on that?

BogeyBones
01-14-2011, 01:28 PM
did he drop the tranny on that?

driveshaft exploded on him

tacoornot
01-14-2011, 04:21 PM
Can we piss in your gas tank? Is it good to start your brand new motor with 1 year old gas? I think piss may be better. :dunno:

AExiOn
01-14-2011, 04:29 PM
Can we piss in your gas tank? Is it good to start your brand new motor with 1 year old gas? I think piss may be better. :dunno:


Actualy when I left Mikes house that night the car was on E.

I only put 5 bucks into it because I knew something was up

Car tank is pretty much empty, might have a galon in there

boxxer joe
01-14-2011, 05:03 PM
did he drop the tranny on that?

looks like the pinion rolling out from behind the car:lol: any ways art we need to get the animal running

Berge56
01-14-2011, 05:27 PM
Actualy when I left Mikes house that night the car was on E.

I only put 5 bucks into it because I knew something was up

Car tank is pretty much empty, might have a galon in there


Put fresh gas in the tank and run the pump to clear out the lines and get new fuel in them before hooking up the lines to the motor.

Bu11dogg2
01-26-2011, 08:51 PM
is EFI not installing the motor?

98Wagoon
01-26-2011, 08:52 PM
no need for that when you have a taco!

AExiOn
01-26-2011, 09:25 PM
Put fresh gas in the tank and run the pump to clear out the lines and get new fuel in them before hooking up the lines to the motor.

BRILIANT! good idea :rofl:



yes taco and I are doing the install

rob trusts us not to **** up :rofl:

Berge56
01-27-2011, 08:25 PM
Thanks Art. So when are you guys thinking about throwing the motor in?

Berge56
02-02-2011, 01:26 PM
any future plans/updates?

tacoornot
02-02-2011, 03:01 PM
Future plans... Convince taco to put in motor....

Berge56
02-02-2011, 03:07 PM
:turborush: I believe this may help the cause. :)

RCKSTR
02-02-2011, 06:30 PM
Future plans... Convince taco to put in motor....

Maybe you can talk to taco :shrug: :lol:

Berge56
02-08-2011, 12:57 PM
Art is bad at convincing me thinks.

AExiOn
02-13-2011, 01:32 PM
well today am changing out the fuel pump

am having a cig first before I un pop the feed line


Even though the fuel has been sitting for a year, something tells me it wont like fire too much

Bu11dogg2
02-13-2011, 02:18 PM
done yet?

tacoornot
02-13-2011, 10:20 PM
8hr fuel pump install

Bu11dogg2
02-13-2011, 10:41 PM
sounds about right

AExiOn
02-13-2011, 10:42 PM
still working on it...

your spoused to drop the fuel pump in the tank after taking the gasket out right?

tacoornot
02-13-2011, 11:50 PM
Just throw the pump down into the tank with some bleech

AExiOn
02-14-2011, 12:42 AM
i'm on it! I read peeing down there too helps

AExiOn
02-20-2011, 01:35 PM
Oh hai

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/184062_10150093031372582_650422581_6346891_2046352 _n.jpg

fbodydude53
02-20-2011, 01:49 PM
Art you gonna be driving that thing to the uconn car show in april?

Sent from my DROIDX using Tapatalk

Berge56
02-20-2011, 05:56 PM
This looks good!

02wrxman
02-20-2011, 06:54 PM
now that a motor

Bigzach88
02-20-2011, 07:17 PM
Art you gonna be driving that thing to the uconn car show in april?

Sent from my DROIDX using Tapatalk

DOUBTFUL :devil:

AExiOn
02-20-2011, 08:57 PM
Art you gonna be driving that thing to the uconn car show in april?

Sent from my DROIDX using Tapatalk

maybe :devil:

yes


Zach I got my engine in my car before you could grow facial hair!!!! <3

98Wagoon
02-20-2011, 10:16 PM
I almost came!








I want to seeeeiiiitttttttt

tacoornot
02-20-2011, 10:57 PM
Oh hai

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/184062_10150093031372582_650422581_6346891_2046352 _n.jpg

:Imarapeyosht:

98Wagoon
02-20-2011, 10:58 PM
you have a very firm grip on that shaft.

AExiOn
02-20-2011, 11:03 PM
http://hphotos-ash1.fbcdn.net/175127_10150093018502582_650422581_6346708_831263_ o.jpg

tacoornot
02-20-2011, 11:10 PM
www.agency-power.com/catalog/agency-power-fuel-rail-subaru-p-7778.html?osCsid=hg1od7n3nj1o55p773jsjh7v14

They say it mounts under the inter cooler on the pitch mount

tacoornot
02-20-2011, 11:12 PM
you have a very firm grip on that shaft.

I had just pinched my nutt, rite when art took that pic

98Wagoon
02-20-2011, 11:22 PM
did arthur caress the pinched appendage? I mean lets be honest.. you were doing him a favor at the time, amirite?

tacoornot
02-20-2011, 11:25 PM
There was a lot of "gay" in that garage.

98Wagoon
02-20-2011, 11:28 PM
now I wish I wasnt at work tonight :(

AExiOn
02-20-2011, 11:30 PM
I had just pinched my nutt, rite when art took that pic

http://images1.memegenerator.net/ImageMacro/5811762/Jabba-Nipple-pinchy.jpg?imageSize=Medium&generatorName=Corden

Quadsbc
02-21-2011, 12:08 AM
Damn that intake manifold looks purdy!

Bigzach88
02-21-2011, 12:19 AM
hopefully it will be running by WBM lol

02wrxman
02-21-2011, 06:56 AM
love this build and car hope to see it in person some time

AExiOn
02-21-2011, 08:17 AM
Damn that intake manifold looks purdy!

Thanks sir, yours been looking extra sexxy lately too :cool:

hopefully it will be running by WBM lol

YES zach, it will. Are you going to grow a beard for WBM? oh wait <3

love this build and car hope to see it in person some time

ill be at a new NES meets this year, I am not one for car shows but I may go to the uconn one to say Hi to the ********* that dont get to see me anymore

Berge56
02-21-2011, 09:18 AM
Nice Art. So end of the week she should be running. :)

yaya
02-21-2011, 11:00 AM
Yay!

AExiOn
02-21-2011, 12:07 PM
Nice Art. So end of the week she should be running. :)


lol hopefully

Berge56
02-21-2011, 01:13 PM
fingers crossed for ya.

02wrxman
02-21-2011, 03:14 PM
i see and best of luck to get it running this week

RCKSTR
02-21-2011, 07:42 PM
Art, I'll try to go to UCONN also :up: never been to that show but have allways wanted to go...

Good luck with the motor, hope to see this car at some events!

AExiOn
02-21-2011, 07:46 PM
^^^^^^^^^^
Thanks to the both of ya


Uconn car show isn't too bad. ********* win biggest club participation every year

but it is fun gathering the subaru guys votes together and all vote for cars who normally don't win

I think 08 we all voted for a regular 08 lancer with cardboard cut outs of all of the "body mods" a evo has

Bigzach88
02-22-2011, 12:18 AM
YES zach, it will. Are you going to grow a beard for WBM? oh wait <3





i would but it is not allowd at my job lol

98Wagoon
02-22-2011, 12:45 AM
^^^^^^^^^^
Thanks to the both of ya


Uconn car show isn't too bad. ********* win biggest club participation every year

but it is fun gathering the subaru guys votes together and all vote for cars who normally don't win

I think 08 we all voted for a regular 08 lancer with cardboard cut outs of all of the "body mods" a evo has

I refuse to search. so when is this meat show?

fbodydude53
02-22-2011, 01:28 AM
April 9th. Be there. :hide:

Sent from my DROIDX using Tapatalk

98Wagoon
02-22-2011, 01:30 AM
hey I have that day off! just might be able to make it after all...

Berge56
02-22-2011, 09:42 AM
Is it running yet!? :hide:

Berge56
03-01-2011, 11:36 AM
Is it running yet!? :hide:

This!

AExiOn
03-01-2011, 11:46 AM
lol just waiting for a day for taco to gather some free time

maybe tonight or tomorow

I just need to do fuel rail lines and distro block, replace old rusted bolts on the hotside of the turbo, piss out old fuel and replenish tank with fresh fuel, and buy a bunch of effing oil



then, its send resumes out and find a better job :rofl:

Berge56
03-01-2011, 12:01 PM
Profit! Sounds good Art.

AExiOn
03-01-2011, 12:22 PM
In reality, I just want the car back so I can find a new job :lol:

98Wagoon
03-01-2011, 11:11 PM
http://img.photobucket.com/albums/v449/mrangerroy/randomstuff/pics/bugeyes.jpg

AExiOn
03-02-2011, 12:05 AM
your just mad that we have more fun

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190758_10150099734877582_650422581_6415243_5649347 _n.jpg

98Wagoon
03-02-2011, 12:50 AM
keep that nonsense up and I'll tow a wagoon down there and make you put the bittch back together!

Berge56
03-02-2011, 09:43 AM
:munch:

tacoornot
03-02-2011, 09:54 AM
:munch:
^^^^^
This!

And that
VVVVVVV

fbodydude53
03-02-2011, 10:05 AM
:unamused:

Sent from my DROIDX using Tapatalk

AExiOn
03-02-2011, 11:34 PM
^^^^
Oh and brilliant

dont be fooled with the car on the ground

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/190743_10150100379477582_650422581_6420747_5214877 _n.jpg

we actually didn't get anything done today :lol:
god damn agency power fuel rails :unamused:
It would be great if you had a front mount, then its easy as hell to mount the damn thing

Berge56
03-02-2011, 11:58 PM
:spin:

jmb1983
03-02-2011, 11:59 PM
:bananahammock:

AExiOn
03-03-2011, 12:03 AM
http://thegnukid.files.wordpress.com/2009/10/banana-hammock.jpg?w=450&h=448

tacoornot
03-03-2011, 08:41 AM
Last night was frustrating

98Wagoon
03-03-2011, 08:43 AM
tell it to stop!



also. you working on this tonight, as well? I wanna visit :wub:

AExiOn
03-03-2011, 08:58 AM
Come on down, shoot me a pm for my address

Last night was frustrating

THIS I drank more after you guys left

98Wagoon
03-03-2011, 09:06 AM
yessssssss!! :lol:

Berge56
03-03-2011, 09:58 AM
So close.....

Kojak77
03-03-2011, 10:56 AM
What's left to do?

98Wagoon
03-04-2011, 11:15 AM
after last night.. bleed the fuel lines, mod the turbo heat shield a little, put the radiator/fans back in, button up the evap/egr lines, put in the tmic, get a bpv elbow.. I think thats it, really. its getting there!




I also teabagged the morettes every chance I got..

AExiOn
03-04-2011, 11:31 AM
I also teabagged the morettes every chance I got..


true story, my car got raped last night

Bu11dogg2
03-04-2011, 11:34 AM
good work Gaddis.

AExiOn
03-04-2011, 12:21 PM
Taco: Where is the bracket for the fuel distro block
Me: I dont know where did you put it
Taco: I dont know, we need to find it
-20 mins later-
Me: Where the **** is it!! It couldnt of gone far.. How in the **** did we loose this
Taco: is it in your room?
Me: Why in the **** would it be in my room?
Taco: Well I had the block last night in the kitchen, and you where really ****ed up last night.
Me: Yeah but why in the **** would it be in my room..
-another 20 mins later-
me: fuuuuuuuuuuuuuuuuuuccccccccccccccccccccccccccccccc cccc How in the hell did we loose this
Taco: was it in your room?
me: no nor the kitchen
-10 mins later-
me: so, if the bracket is missing, where are the nuts and washers that came with it go, i bet its near the distro block
taco: how in the **** did we loose this, oh yeah we where angry and have been drinking last night
at this point I just start laughing.. just because..
-15 mins later-
taco walks over to his tool box and opens it
Taco: oh here it is, i put it in here last night so it would stay safe, hey look the bolts and washers are here too, hey lets put this in now!!!

me: :unamused: :turborush:

Berge56
03-04-2011, 11:31 PM
:lol:


So...............................

AExiOn
03-04-2011, 11:36 PM
hi


i'm slowing going out to the garage

to grab the beer thats out there one by one

Berge56
03-04-2011, 11:42 PM
:couch: that is me.

tacoornot
03-05-2011, 12:00 AM
I know art can put a radiator in... An intake on... A battery tie down.... Windshield washer tank.... Why do you need me there

Berge56
03-05-2011, 12:08 AM
Entertainment??!!!

AExiOn
03-05-2011, 11:17 AM
random reach arounds

Kojak77
03-05-2011, 07:07 PM
surprise reach arounds

^^^^^^^
fixed!


Is this thing done yet?

AExiOn
03-05-2011, 07:23 PM
haha

why would it be?

Its a garage queen now, am like a frighten parent that wont let its off spring go outside

98Wagoon
03-05-2011, 07:30 PM
Taco: Where is the bracket for the fuel distro block
Me: I dont know where did you put it
Taco: I dont know, we need to find it
-20 mins later-
Me: Where the **** is it!! It couldnt of gone far.. How in the **** did we loose this
Taco: is it in your room?
Me: Why in the **** would it be in my room?
Taco: Well I had the block last night in the kitchen, and you where really ****ed up last night.
Me: Yeah but why in the **** would it be in my room..
-another 20 mins later-
me: fuuuuuuuuuuuuuuuuuuccccccccccccccccccccccccccccccc cccc How in the hell did we loose this
Taco: was it in your room?
me: no nor the kitchen
-10 mins later-
me: so, if the bracket is missing, where are the nuts and washers that came with it go, i bet its near the distro block
taco: how in the **** did we loose this, oh yeah we where angry and have been drinking last night
at this point I just start laughing.. just because..
-15 mins later-
taco walks over to his tool box and opens it
Taco: oh here it is, i put it in here last night so it would stay safe, hey look the bolts and washers are here too, hey lets put this in now!!!

me: :unamused: :turborush:

truth!! :unamused:


I know art can put a radiator in... An intake on... A battery tie down.... Windshield washer tank.... Why do you need me there


can he, though?


:hide:

AExiOn
03-06-2011, 03:24 AM
do what now?

http://msp207.photobucket.com/albums/bb16/SaturdayPromises/Random-ness/meatwad.jpg

98Wagoon
03-06-2011, 03:25 AM
DO WORK SON!

AExiOn
03-06-2011, 03:26 AM
hold up... drunk right now